9
SW24.T
Remote control programming
Note: remote control programming can only be done with the automatic gate system stationary
Step-by-step programming
No. Pressing push button Signal PRG LED
Description
1
MRX
Off
Press the MRX push-button and hold it down until the green PRG LED starts flashing slowly
2
Remote control push-
button
Slow blink
Press the remote control push-button that you want to save
3
-
Fixed 1 s
Button of the saved remote control (new remote control)
3 blinks
Memory full
Programming the second radio channel
No. Pressing push button Signal PRG LED
Description
1
MRX
Off
Press the MRX push-button and hold it down until the green PRG LED starts flashing fast
2
Remote control push-
button
Fast blink
Press the remote control push-button that you want to save
3
-
Fixed 1 s
Button of the saved remote control (new remote control)
3 blinks
Memory full
Deleting a remote control
No. Pressing push button Signal PRG LED
Description
1
MRX
Off
Press the MRX push-button and hold it down until the green PRG LED starts flashing very
fast
2
Remote control push-
button
Very fast flashing
Press the button on the remote control to delete
3
-
Fixed 1 s
Deletion successful
Complete deletion of the receiver
No. Pressing push button Signal PRG LED
Description
1
-
Off
Remove power from the control panel and disconnect any batteries
2
MRX
On steady
Reapply power to the control panel without releasing the MRX button until the PRG LED
turns off
3
-
Off
Receiver deleted completely
Note:after deleting all the remote controls, the first saved remote control configures the control panel to accept only remote controls with a
rolling code or only remote controls with a fixed code.
EN
