1100
Viale Vicenza, 14
36063 Marostica VI - Italy
www.vimar.com
S6I.110.000 02 1809
The instruction manual is downloadable from the site
www.vimar.com
Installation rules
Installation should be carried out by qualified personnel in compliance with the current regulations
regarding the installation of electrical equipment in the country where the products are installed.
Conformity
EMC directive
Standards EN 61000-6-1 and EN 61000-6-3.
WEEE - Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the
product must not be included with other general waste at the end of its working life. The
user must take the worn product to a sorted waste center, or return it to the retailer when
purchasing a new one. Products for disposal can be consigned free of charge (without any
new purchase obligation) to retailers with a sales area of at least 400m
2
, if they measure less than
25cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device,
or its subsequent recycling, helps avoid the potential negative effects on the environment and people’s
health, and encourages the re-use and/or recycling of the construction materials.
Instructions for the replacement of the new button strips on 1100
series entry panels
1) Remove the front plate.
2) Remove the old button-holder strip, without detaching the connection wires.
3) Insert the new button-holder strip and tighten the screws in such a way as to ensure
the correct alignement of the external buttons.
4) Connect the new internal push-buttons according to previous order.
