21
VIMAR group
4 PTZ Control
PTZ control is only effective if the selected IP address is that of a device with PTZ features or speed dome camera.
4.1 Move or Stop
The setting steps are as follow.
1 - Control the speed dome/PTZ by moving the joystick. When moving the joystick back to the original place, the speed
dome stops moving.
Note:
The camera input to the above example must be a PTZ device (or speed dome), or the calling is invalid. The effective
value of the preset is from 1 to 255. The effective value of the cruise is from 1 to 8 and. The effective value of track is
from 1 to 4. If the calling number is beyond the range, an invalid tip will be displayed on the screen.
4.2 Set or Call Preset
To set preset
1 - Set the position of the preset by moving joystick.
2 - Press the digital number on the keyboard to select the number of preset. Then press “PRESET” for more than 2
seconds to set the preset. For example, input 1 and then press “PRESET” for more than 2 seconds to set the NO.1
preset.
EN
To call preset
1 - Select the preset. For example, input 1 and press “Preset”.
4.3 Call or Stop Cruise/Track
To call cruise/track
.
1 - Select the cruise/track. For example, input 1 and press “CRUISE/TRACK”.