46822.036C
Istruzioni
User manual
SPECIFICATION
Model No
46822.036C
Sensor
1/3" 960H High Sensitivity sensor
Video Format
PAL/NTSC
Resolution
800TVL
Mini Illumination
0 Lux (IR ON)
S/N Ratio
≥48dB (AGC OFF)
White Bal
ATW
Shutter
AUTO (1/100~1/100000)
D/N
AUTO
2D-DNR
2D
Sync Mode
INTERNAL
Voltage
12Vdc
Cur rent
200mA
IR range
20m
Water proof
Ip66
Lens Mount
3.6mm
Storage Temp
-20°C ~70°C
Operating Temp
-10°C ~50°C RH90% MAX
Dimension
70(H) * 94(Φ) mm
Weight
570g
*Specifications subject to change without notice.
CAUTION
RISk OF ELECTRIC
SHOCk DO NOT OPEN
CAUTION: TO REDUCE THE RISk OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL
.
7
0.0m
m
5
.0m
m
DESCRIPTION
This IR Dome Camera adopt high sensitivity sensor and advanced circuit design,
The resolution up to 800TVL, Fashionable and professional appearance design,
functions ensure clear bright pictures. Besides, Mirror, Privacy and other aided
functions with IR-CUT filter design, easily have 24 hours day and night.
ATTENTION
Thank you for your purchasing this product. Before attempting to connect or ope
-
rate this product, please read these instr uctions carefully and save this manual
for future use.
Dome IR 800TVL camera, 3,6mm lens,
1. Use the Appropriate Power Supply
The input power for the camera is DC12V. Be sure to connect it to the appro
-
priate power. Wrong connection may cause malfunction and/or damage to the
video camera.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user ser
viceable parts inside. Ask a qualified ser vice person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be
damaged by improper handling or storage.
4. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to
remove. Use a mild detergent and wipe gently.
5. Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive detergents.
Use a piece of lens tissue or cotton tipped applicator and ethanol.
6. Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely brightobjects
that causes mear to appear irrespective of whether the camera is operating
or not. This can damage the sensor.
7. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communica-
tion device which emits strong electromagnetic field, some irregularity such
as noise on monitor screen may happen.
FEATURES
Adopt high perfor mance sensor, the image is clear, exquisite
Auto color to black function
Day and Night Monitoring daytime with enough light, color image, at night, low
light, change to black image automatically to improve the sensitivity and picture
quality.
High resolution
Up to 800TVL high resolution.
High S/N Ratio.
S/N Ratio definition: the ratio between signal voltage and noise voltage, the hi-
gher of the ratio, the less interference of the noise, and the image is more clearer.
Long-life IR LEDS Design
High-performance IR LED, whose brightness
is several times higher and service life longer
than an ordinary LED’s.
Automatic gain control (AGC)
In order to output standard video signal under different illumination conditions,
The amplifier gain need to adjust automatically in large scope.it can increase the
sensitivity automatically when low light and enhance the signal output to have a
clear bright image.
Auto White Balance
ATW is the cameras’ reversion of the white objects, it can adjust the room tem-
perature and outside temperature.when the temperature change, the human eye
can see that white is white. This is because human eye can adapt to the changes
of the color temperature, but the camera does not perform well equally, when
Light occurs, the white color will change to others after shooting. White Balance
technology can correct this problem
IP-66 weather proof standard
1. Take out the fixing screws on the lock base by the allen wrench in the ac-
cessory bag. (Another way: hold the base plate and turn it in anti-clockwise
direction)
2. Separate the base plate from the lock base.
3. Use screws to fix the base plate to the needed place.
4. Then put the sphere and the lock base to where they belong and screw up
the fixing screws.
5. Adjust Lens focal length.
DIMENSION (mm)
PARTS INSTRUCTION AND INSTALLATION
.
7
0.0m
m
5
.0m
m
.
7
0.0m
m
5
.0m
m
Sphere
OSD Drived by cable
Video Cable Power Cable
Base Plate
Lock Base
Wrench
Screw Hole
1
2
3
Long-effective IR Light Source Design
Other brands
Service Life
IR Sensnsitivity
1 yr
2 yr
3 yr
4 yr
49400719A0 00 14 09
VIMAR - Marostica - Italy
Vimar SpA: Viale Vicenza, 14
36063 Marostica VI - Italy
Tel. +39 0424 488 600 - Fax (Italia) 0424 488 188
Fax (Export) 0424 488 709
www.vimar.com