Via Pontarola, 14/a - 35011 Campodarsego PD
tel. +39 049 920 2511 - fax +39 049 920 2603
www.elvox.com
Manuale Utente
User Manual
S6I.46816.212 RL. 00 13 03
ELVOX - Campodarsego - Italia
Color Weatherproof IR Camera
DESCRIPTION
This weatherproof IR camera adopt high sensitivity sensor and advanced circuit
design, the resolution up to 600TVL, support automatic white balance, high S/N Ratio,
clear picture, with the function of color to black automatically, with IR-CUT filter design,
easily have 24 hours day and night. Fashionable and professional exterior design and
special all-inone all directional bracket, makes round-the-clock surveillance easy and
convenient.
ATTENTION
Thank you for your purchasing this product. Before attempting to connect or operate
this product, please read these instructions carefully and save this manual for future
use.
1. Use the Appropriate Power Supply
The input power for 46816.212 is DC12V. Be sure to connect it to the appropriate
power. Wrong connection may cause malfunction and/or damage to the video
camera.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be
damaged by improper handling or storage.
4. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
Do not place the camera in the following locations:
1 Locations where temperature is lower than -10°C or higher than 50°C;
2 Locations where humidity is higher than 95%;
3 Locations where there are large amounts of water vapor and steam.
5. Do note use strong or abrasive detergents when cleaning the camera body. Use a
dry cloth to clean the camera when dirty. In case the dirt is hard to remove. Use a
mild detergent and wipe gently.
6. Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive detergents.
Use a piece of lens tissue or cotton tipped applicator and ethanol.
7. Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely bright objects that
causes mear to appear irrespective of whether the camera is operating or not. This
can damage the sensor.
8. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication
device which emits strong electromagnetic field, some irregularity such as noise on
monitor screen may happen.
FEATURES
Adopt high performance sensor, the image is clear, exquisite
Automatic function from color to B/W
Day and Night Monitoring daytime with enough light, color image, at night, low light,
change to black image automatically to improve the sensitivity and picture quality.
High resolution
Up to 600TVL high resolution.
High S/N Ratio.
More than 52 dB.
IR-CUT
Built-in filter switch-over device, ensures the cameras work properly both in day and
night.
Long-life IR LEDS Design
High-performance IR LED,whose brightness is
several times higher and service life longer than
an ordinary LED's with 40m IR range.
Bracket
Elegant and solid combined type bracket, with video and power cable built-in.
makes installation convenient and reliable.
IP-66 weatherproof standard
Automatic gain control (AGC)
In order to output standard video signal under different illumination conditions,The
amplifier gain need to adjust automatically in large scope.it can increase the
sensitivity automatically when low light and enhance the signal output to have a
clear bright image.
Auto White Balance
ATW is the cameras' reversion of the white objects, it can adjust the room
temperature and outside temperature.when the temperature change, the human
eye can see that white is white,This is because human eye can adapt to the
changes of the color temperature, but the camera does not perform well equally,
when Light occurs, the white color will change to others after shooting. White
Balance technology can correct this problem.
PARTS INSTRUCTION AND INSTALLATION
1. Sunshade
2. Fixing Screw for Sunshade
3. Camera Body
4. Camera Vertical Fixing Screw
5. Camera Horizontal Adjusting Ring
6. Bracket Base 7. Menu Button (optional)
8. Focus Knob
9. Zoom Knob
Camera Installation
1. Fix the camera to the needed place with the four pieces of screws.
2. Loosen the horizontal adjusting ring, adjust it to the needed place, then fix the
horizontal adjusting ring.
3. Loosen the angle fixing screw, adjust it to the needed place, then fix the angle fixing
screw.
DIMENTION(MM)
SPECIFICATION
Model
46816.212
Sensor
1/3” High Sensitivity Sensor
video format
PAL/NTSC
resolution
600HTVL
Mini-illumination
0.2Lux (IR OFF), 0Lux (IR ON)
S/N Ration
52dB AGC OFF
Electronic-shutter speed
1/50(60)~1/12,000s
BLC
Auto
AGC
Auto
White balance
ATW
Day/Night
Auto
Syncronization
Internal
Voltage
DC12V
Current
<340mA
IR-CUT
Auto
Lens
2.8-12mm
IR range
40m
Weatherproof standard
IP 66
Video output
1.0Vp-p/75ohm
Storage temperature
-20°C~50°C
Operate Temperature
-10°C~50°C
Size
244(L) * 120(H) * 80(W)
Weight
1000g
*Specifications subject to change without notice.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL
Long-effective IR Light Source Design
Other brands
Service Life
IR Sensnsitivity
1 yr
2 yr
3 yr
4 yr
600TVL bullet IR camera, 2,8-12mm lens
46816.212
