Viale Vicenza, 14
36063 Marostica VI - Italy
www.vimar.com
46522.028C
49401171A0 00 1703
PARTS INSTRUCTION AND INSTALLATION
HD IR Camera
User Manual
DESCRIPTION
The camera adopt 3.15 mega pixels high performance 1/3 CMOS
sensor. The camera adopt new material with IP66 waterproof standard,
IR-CUT filter, smart-IR control. Fashionable and professional design.
ATTENTION
Thank you for your purchasing this product. Before attempting to connect
or operate this product, please read these instructions carefully and save
this manual for future use.
70.0mm
5.0m
m
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
1yr
2yr
3yr
4yr
1. Use the Appropriate Power Supply
The input power for the camera is 12 Vdc. Be sure to connect it to the
appropriate power. Wrong connection may cause malfunction and/or
damage to the video camera.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are
no user serviceable parts inside. Ask a qualified service person for
servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera
could be damaged by improper handling or storage.
4. Do note use strong or abrasive detergents when cleaning the camera
body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard
to remove. Use a mild detergent and wipe gently.
5. Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive
detergents.Use a piece of lens tissue or cotton tipped applicator and
ethanol.
6. Do not attempt to aim the camera at the sun or other extremely
brightobjects that causes mear to appear irrespective of whether the
camera is operating or not. This can damage the sensor.
7. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless com-
munication device which emits strong electromagnetic field, some
irregularity such as noise on monitor screen may happen.
FEATURES
- 3.15 Megapixel high performance 1/3 CMOS sensor, no com-
pressed, no delay, and real-time transmission image .
- Built in IR-CUT, ensure the camera work properly both day and night.
- IP66 waterproof standard
- Long-life IR LED design, whose brightness is several times higher
and service life longer than ordinary LED’s
- SMART-IR, 20 meters IR range
Model
46522.028C
Sensor
1/3 CMOS
Effective Pixels
2048(H)x1536(V)
Video Frame Rate
25/30fps
Video format
PAL/NTSC
Mini-illumination
0.01 Lux (IR ON)
S/N Ration
≥41 dB
OSD
Support
AGC
0-15
White Balance
ATW / INDOOR / OUTDOOR / MANUAL
BLC
AUTO
NR
2DNR
AES
AUTO 1/50 (1/60) - 1/50,000sec
AWB
AUTO
Day/Night
EXT, COLOR, B/W, AUTO
Sync code
Internal
Voltage
12 Vdc
Current
150mA ±15% (IR ON); 62mA ±15% (IR OFF)
Lens
2.8mm HD Lens
IR range
20m
Waterproof standard
IP66
Video output
AHD
Storage temperature
-20°C ~50°C
Operate Temperature
-10°C ~ 50°C RH 90% MAX
Size
70mm(H)*94mm(Ø)
Weight
570g ±15%
*Specifications subject to change without notice.
70.0mm
5.0m
m
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
1yr
2yr
3yr
4yr
IR Sensitivity
Long-effective IR Light Source Design
Service Life
Other brands
Sphere
Video
cable
Power
cable
OSD Drived by cable
Base Plate
Lock
Base
Screw
Hole
DIMENSIONI (mm)
1. Take out the fixing screws on the lock base by the allen wrench in the
accessory bag. (Another way: hold the base plate and turn it in
anti-clockwise direction)
2. Separate the base plate from the lock base.
3. Use screws to fix the base plate to the needed place.
4. Then put the sphere and the lock base to where they belong and
screw up the fixing screws.
5. Adjust Lens focal length.
PARTS INSTRUCTION AND INSTALLATION
5.0 mm
70.0 mm
94.0 mm