- ANTI-SAT[0-20] : When switching B/W, saturation occurs in specific condition depending on
brightness. In this situation, you can prevent the saturation by defining the level of ANTI-SAT.
- AGC THRES [0-20] : Execute the Day/Night switch depending on the AGC level that is
used to increase the brightness of the image. Higher values require a darker illumination to
execute the switch.
- MARGIN [0-20] : Define the difference between the Day/Night & Night/Day switch based on
AGC THRES. Higher values will increase this distance and can help to prevent continuous
switching between Day & Night mode.
- DELAY [MIDDLE, HIGH, LOW]: Set the delay time for switching between COLOUR and B/W.
The camera needs to find a reference colour temperature, which is a way of measuring the
colour of a light source, for calculating all the other colours. The unit for measuring this ratio
is in degree Kelvin (K). You can select one of the White Balance Control modes according to
the installation condition.
White Balance
MENU
LENS
EXPOSURE
BACKLIGHT
DAY / NIGHT
WHITE BAL
DNR
IMAGE
MOTION
SYSTEM
EXIT
DC
OFF
AUTO
ATW
MIDDLE
OFF
16
TVCC
EN