4
EN
1 - Focus Adjusting:
When it still fails to realize focusing after having confirmed the correct lens interface, the back focus adjustment may be required.
Operate the following steps: tighten the lens firstly and then loose the fixed back focus ring; rotate the lens slowly until the video
image turns to be clear, and finally tighten and lock the back focus ring.
2 - Iris Lens Plug:
The Camera provides an iris lens plug in negative pattern with four square holes and the definition of pins is shown above. The
interface of DC drive auto iris adopts four pins: Damp+, Damp-, Drive + and Drive-.
2 Installation
2.1 - Wall Mounting
Step 1: Rotate the lens clockwise onto the lens mount of the camera.
Step 2: Plug the wire of auto iris lens to the auto iris interface of the camera.
1
Reset key
7
SD card slot
2
Audio input port
8
Alarm output port
3
Audio output port
9
Alarm input port
4
Reserved antenna port
10
Connect to PTZ
5
Video output port
11
Network port
6
Power indicator
12
Connect to Power
Manuale per l’installazione e l’uso
Installation and operation manual
46232.012
Telecamera box IP full HD passo C/CS
Camera box IP full HD C/CS mount
The connection of IP-CAM is shown below:
Manuale per l’installazione e l’uso
Installation and operation manual
46232.012
Telecamera box IP full HD passo C/CS
Camera box IP full HD C/CS mount
User can connect the PC and IP-CAMERA in accordance with above picture. Before connecting, please connect external
devices, and then connect the power.
The connection step as shown below:
Step 1
: Connect IP-CAM firstly.
Step 2
: Internet line connect to Internet transfer equipment or devices
Step 3
: Connect power cable to a power outlet.
Manuale per l’installazione e l’uso
Installation and operation manual
46232.012
Telecamera box IP full HD passo C/CS
Camera box IP full HD C/CS mount
