Via Pontarola, 14/a - 35011 Campodarsego PD
tel. +39 049 920 2511 - fax +39 049 920 2603
www.elvox.com
Manuale Utente
User manual
S6I.46.822.036 RL. 00 13 03
ELVOX - Campodarsego - Italia
Vandalproof IR Dome Camera
DESCRIPTION
This IR Dome Camera adopt high sensitivity sensor and advanced circuit design, the
resolution up to 600TVL, support automatic white balance, high S/N Ratio, clear picture,
with the function of color to black automatically, with IR-CUT filter design, easily have 24
hours day and night.
ATTENTION
Thank you for your purchasing this product. Before attempting to connect or operate this
product, please read these instructions carefully and save this manual for future use.
1. Use the Appropriate Power Supply
The input power for the camera is DC12V. Be sure to connect it to the appropriate
power. Wrong connection may cause malfunction and/or damage to the video camera.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
4. Do not expose the camera to rain or moisture, or try to operate it in wet areas. Do not
place the camera in the following locations:
1 Locations where temperature is lower than -10°C or higher than 50°C;
2 Locations where humidity is higher than 95%;
3 Locations where there are large amounts of water vapor and steam.
5. Do note use strong or abrasive detergents when cleaning the camera body. Use a dry
cloth to clean the camera when dirty. In case the dirt is hard to remove. Use a mild
detergent and wipe gently.
6. Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive detergents.
Use a piece of lens tissue or cotton tipped applicator and ethanol.
7. Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely bright objects that
causes mear to appear irrespective of whether the camera is operating or not. This can
damage the sensor.
8. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication device
which emits strong electromagnetic field, some irregularity such as noise on monitor
screen may happen.
FEATURES
Adopt high performance sensor, the image is clear, exquisite
Automatic function from color to B/W
Day and Night Monitoring daytime with enough light, color image, at night, low light,
change to black image automatically to improve the sensitivity and picture quality.
High resolution
Up to 600TVL high resolution.
High S/N Ratio.
More than 52 dB
Long-life IR LEDS Design
High-performance IR LED, whose brightness is several
times higher and service life longer than an ordinary
LED's with 15m IR range.
IP 65 weatherproof standard
Automatic gain control (AGC)
In order to output standard video signal under different illumination conditions,The
amplifier gain need to adjust automatically in large scope.it can increase the sensitivity
automatically when low light and enhance the signal output to have a clear bright
image.
Auto White Balance
ATW is the cameras' reversion of the white objects, it can adjust the room temperature
and outside temperature.when the temperature change, the human eye can see
that white is white,This is because human eye can adapt to the changes of the color
temperature, but the camera does not perform well equally, when Light occurs , the
white color will change to others after shooting. White Balance technology can correct
this problem
PARTS INSTRUCTION AND INSTALLATION
1. Lens
2. Camera Mainbody
3. Angle Fixxing Screw
4. Camera base
5. Base Installation Hole
1. Set the camera installing location and fix the camera onto wal with screws.
2. Take the Allen wrench in tool bag and unscrew the angle fixing screw and adjust the
camera to required vertical angle and then fix the screw.
3. Take the Allen wrench in tool bag and unscrew the angle fixing screw and adjust the
camera to required horizontal angle and then fix the screw.
DIMENTION(MM)
SPECIFICATION
Model
46.822.036
Sensor
1/3” High Sensitivity Sensor
video format
PAL/NTSC
resolution
600HTVL
Mini-illumination
0.2Lux (IR OFF), 0Lux (IR ON)
S/N Ration
52dB AGC OFF
Electronic-shutter speed
1/50(60)~1/12,000s
BLC
Auto
AGC
Auto
White Balance
ATW
Day/Night
Auto
Syncronization
Internal
Voltage
DC12V
Current
<380mA
IR-CUT
Auto
Lens
3.6mm
IR range
18meter
Video output
1.0Vp-p/75ohm
Storage temperature
-20°C~50°C
Operate Temperature
-10°C~50°C
Size
77.5(L) * 94( )mm
Weight
40g
*Specifications subject to change without notice.
Long-effective IR Light Source Design
Other brands
Service Life
IR Sensnsitivity
1 yr
2 yr
3 yr
4 yr
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
camera horizontal angle adjustment
camera vertical angle adjustment
600TVL dome IR camera, 3,6mm lens
46.822.036
