Viltrus Electronics MX-7, User Manual

Page: 25 / 87

26
Depending on type of data logger you can connect through RS232 , Ethernet , GPRS or USB (see
Pic 10 ).
Every data logger has it’s own connection default values and can be connected only using them.
Pic 10 Connection interfaces
6.3 Connecting to d
ata logger
over serial COM (device) port [Start]
Before connecting to data logger over RS232 you need to choose correct RS232 cable , configure
serial port and find number of serial port, that is connected to data logger’s serial com port. To
establish connection, you need:
In “Start > Connection parameters” choose Modbus RTU connection type.
Select Com port, that you will use for connection with PC. If connection fails, recheck cabling
and COM port (see Pic 11 ).
Pic 11 Connecting over COM port
If your PC don’t have com port, you can use USB-COM adapter to connect from PC’s USB to
USB
Ethernet
GSM
Serial COM port