Proceed as follows to set the far range via the app:
1.
Establish a Bluetooth connection between the Pr WC controller and the app.
2.
Select your desired range level here.
3.
Press Apply to transmit your chosen setting to the Pr WC controller.
Your selected far range is now set.
5.4.6 Automatic pre-flush
As an additional hygienic feature, the Pr WC controller enables a pre-flush function if
desired. This takes place when a user has been detected in the sensor system’s detection zone for
at least 2 s, and the last flush was more than one minute ago. The flush volume in this case is
approx. 1 litre.
Enabling/disabling automatic pre-flush with the app
Proceed as follows to enable/disable automatic pre-flush via the app:
1.
Establish a Bluetooth connection between the Pr WC controller and the app.
2.
Select Pre-flush on / off in the app.
3.
Press Apply to transmit your chosen setting to the Pr WC controller.
Pre-flush is now either enabled (on) or disabled (off).
5.4.7 Cleaning mode
The Pr system offers a cleaning mode, which shuts down the sensor for a predefined time,
enabling the WC actuation plate and bowl to be cleaned without triggering the sensor.
When cleaning mode is started, the sensor system is shut down for the preset cleaning mode
runtime. When the cleaning mode runtime has elapsed, the sensor system switches back to normal
operating mode.
EN
M.VILLEROY-BOCH.COM // V 0.6 // 23.10.2020 // 921100D7
49
