background image

Safety

EN-UK

P.7

Advice!

Severe bending or twisting of the water supply hose is strictly prohibited; otherwise it
can lead to water leakage.

The new hose -sets supplied with the appliance are to be used. Do not use old hose -sets.

Do not use radio equipment near the product to avoid disturbances.

Do not place the product upside down to avoid damage to the product.

Do not spill water over the remote controller, otherwise the product may not function
properly.

Do not place heavy weight or step on the upper cover or seat to avoid injury due to
damaged product.

Do not lean on the toilet cover while using it or it may damage the cover. Do not sprin-
kle urine on the body or spray nozzle.

Do not hit the display screens with force or other objects using the remote controller,
otherwise it will cause damage to the LCD display or leakage of liquid crystals.

Do not modify the remote controller, or it will cause damage, electric leakage and citcuit
fault of the remote controller.

Do not scratch the display screen and keys using sharp objects such as needles and pen
points.

The remote controller should not be exposed to the extreme conditons such as high
temperature on the surface or direct sunlight.

Do not heat the remote controller or throw it into the fire, otherwise it could cause an
explosion.

If the power supply cord is damaged, it must be replaced by the manufacturer, its ser-
vice agent or similary qualified persons in order to avoid hazard.

4.2 Reasonably predictable misuse

Any use other than those listed under "intended use", or use which goes beyond this, is considered to be

non-intended.
For damage arising from non-intended use, the operator himself is exclusively responsible, and the manu-

facturer does not accept any liability whatsoever.

Summary of Contents for 310000400465329































Reviews: