Villager VLN 7220, Original Instruction Manual

Page: 23 / 119

9
STARTING/SWITCHING OFF
1. Start the product by pressing the power switch (1).
FIG. 2
-
The product starts at high speed.
2. Press the power switch again to switch off the product.
SANDING
WARNING!
Check that the sandpaper is not touching the workpiece when starting the product – risk of
personal injury and/or material damage.
FIG.5
-
Never use the product without sandpaper, this can damage the sanding pad.
-
Do not force the product. Excessive pressure produces inferior results and can damage
the sandpaper and/or reduce the life span of the product.
-
The sanding pad can be damaged if the edge of the pad comes into contact with the
workpiece.
-
Hold the product in a firm grip. Start the product and wait until the motor has
reached full speed. Apply the sandpaper carefully against the workpiece. Hold the
product with the sanding pad flush with the workpiece and gently press the product.
MAINTENANCE
IMPORTANT:
Switch off the eccentric sander and remove the battery before checking, cleaning,
maintenance or adjustments, and before changing accessories.
CLEANING
Clean the sander after use for best functionality and life span. Use a soft cloth and a mild
detergent. Do not use petrol, solvents or detergents that can damage the plastic parts.
REPAIRS
Repairs must only be carried out by an authorised service centre or other qualified personnel
using identical spare parts.
TRANSPORT & STORAGE
•
Clean the tool as instructed and allow it to dry.
•
If the tool shall remain unused for any length of time, it should be stored in the originai
packaging.
•
Store the tool in a dry place, well ventilated and out of the reach of children.