Villager VLN 1315, Manual Instruction

Page: 26 / 118

Villager VLN 1315 (GB)
12
- Clean any overfilled grease.
- Reinstall the crank cover in place.
Maintenance and storage
Maintain your tool regularly. This will keep your tool in good working order and extend
its lifespan.
Do not use abrasive, caustic agents to clean the tool. These types of products will
damage your tool.
Do not perform repairs by yourself. Repairs and inspection must be carried out by a
competent person or at an authorized service center (please contact you service
dealer).
After each use
Check the blade, cable and body of the tool (cleanliness, wear, damage, etc.). If you
notice damage, wear, or malfunction, do not use the tool and bring it to a qualified
service for inspection and reparation.
Maintenance
There is no specific maintenance to be performed by the user. After each season, please
bring the tool to an authorized service center to perform a general cleaning and the
following operations:
1.
Lubrication of the blade
2. Mechanical check of motor, spindle, bearings and housing.
3. Electrical check.
4. Electrical and mechanical performance.
Storage
After use and cleaning, please store your tool. Store the tool in a clean, dry place,
preferably in its box. During transport and storing always put the protection cover on
the blade. The tool must be stored away from children and pets. Avoid exposing the tool
to direct sunlight.
Disposal information
Recycling raw materials instead of waste disposal.
Device, accessories and packaging should be recycled in an environmentally
friendly manner. Plastic parts are identified for recycling according to
material type.