Villager VLN 120, Original Instruction Manual

Page: 23 / 66

Villager VLN 120 (GB)
11
USE
•
On/off switch
Check if switch is off before plugging in
- switch on the tool by pushing switch
- switch off the tool by pushing switch
•
Lock-off button
-
operate continuously by pushing the lock-off button
•
peed button
- adjust speed by turning the speed button
•
pad (disc)
- the connection of the pad is M14; Standard diameter for our machine is
180mm; It can be changed accordingly;
•
Woolen wheel
-
the material can be changed to be sponge accordingly
MAINTENANCE / SERVICE
•
Always keep tool and cord clean
Disconnect the plug before cleaning
•
Never use easy inflammable liquids for cleaning the polisher in general
•
If the tool should fail despite the care taken in manufacturing and testing
procedures, repair should be carried out by an after-sales service center
ENVIRONMENTAL PROTECTION AND DISPOSAL
CAUTION! This product has been marked with a symbol relating to
removing electric and electronic waste. This means that this product
shall not be discarded with household waste but that it shall be
returned to a collection system which conforms to the European WEEE
Directive. Contact your local authorities or stocks for advice on
recycling. Then it will be recycled or dismantled in order to reduce the
impact on the environment. Electric and electronic equipment can be
hazardous for the environment and for human health since they contain
hazardous substances.