Villager
V 46 T / VR 46 T (GB)
8
Operation
Brake lever-must be held down to the handle to start the engine. Release to stop the engine.
Starter handle
- used for starting engine.
Drive control lever ( Model
VR 46 T)
-used to engage power-propelled forward motion of lawn mower.
USE YOUR LAWNMOWER ENGINE SPEED
The engine speed was set at the factory for optimum performance. Speed is not adjustable.
DRIVE CONTROL
(Model: VR 46 T)
Self-propelling is controlled by holding the operator presence control bar down to the handle and
pushing the drive control lever forward until it clicks; then releasing the lever.
Forward motion will stop when the operator presence control bar is released . To stop forward
motion without stopping engine. Release the operator presence control bar slightly until the drive
control disengages. Hold operator presence control bar down against handle to continue mowing
without self-propelling.
Drive lever
(only for VR 46 T )
Brake lever
Push handle