Villager DM 14 P, Original Instruction Manual

Page: 6 / 71

Villager
DM 14 P (GB)
6
As shown in Fig 1 set the machine in
dusting state. Connect dust pipe to the
machine, then fasten it with clamps.
Before using the machine, check if the
rocker is widely opens . When carrying
the machine on the back, you can
regulate the spraying jet distance by
adjusting
the throttle handle.
Regulating the dust switch can adjust
the flow volume of chemical (the
volume increase when move to “+”, on
the contrary, the volume will decrease,
till to be closed). Close the dust switch
after the spraying finishes.
Pay attention during spraying
First, when use the machine as duster,
the dust filled in the tank should be no
more than 2/3 of the total volume of
the chemical tank.
Secondly, static incurs during dusting,
the drier the air is, the more fierce
static incurs, please pay sufficient
attention. To avoid the hurt from static,
we provide the static-proof
chain. Please connect the chain
correctly following the instruction in
Fig.1 the copper end of the chain
should be inserted in to the pipe and
can vibrates freely while the other
end should keep the contact with the
earth, the lower end can be fastened
close to your ankle.