6
AGM
BG 125 (GB)
ATTENTION
DANGER OF ELECTRIC SHOCK!
Consider working area environment. Do not expose
power tools to rain. Do not use power tools in damp or wet locations. Keep work
area well lit and dry. Try to prevent the device from getting wet or being exposed
to humidity. Do not leave it outside overnight. Water entering a power tool will
increase the risk of electric shock.
•
The power supply cable should be checked regularly and, before using it, make
sure the cable is not damaged or worn out. If the cable is not in good condition,
do not use the appliance; take it to an authorized service centre.
•
When tool is used outdoor, only use an extension cable that is suitable for
outdoor use and which is marked for this specific use. Keep it away from the
working area, from damp, wet or oily surfaces and away from heat and
flammable materials.
•
Avoid any accidental starting: make sure that the power switch (if present) is in
the “off “ position, before plugging the tool in
.
•
Remove adjusting keys or wrenches before turning the tool on.
•
Do not use the tool if the switch does not turn the tool on or off. Any tool that
cannot be controlled with the switch is dangerous and must be repaired.
WARNING
During the use of power tools, some dust containing chemicals known to cause
cancer, may occur. Some of these chemicals are: lead from lead based paints,
crystalline silica from bricks and cement and other masonry products, arsenic and
chromium from chemically treated lumber and other dangerous products. If dust is
present, your risk from these exposures varies, depending on how often you do this
type of work.
To reduce your exposure to these chemicals, any time you do
pulverulent operations, work in a well ventilated area and work with approved
safety equipment, such as dust masks that are specially designed to filter out
microscopic particles.
•
If the appliance strikes a foreign body, examine the device for signs of damage
and carry out any necessary repairs before restarting and continuing to work.
•
If the appliance starts to vibrate abnormally, turn it off and check for the cause
immediately. Vibration is generally a warning of trouble.
•
Always switch off the appliance and wait until the device completely stops
whenever you leave the machine, before carrying out maintenance, before
checking, cleaning or working on the appliance.
•
It is forbidden to move or modify any of the internal parts of the device.
