O&M Manual v.1.42 October 2017
4
2 Unpacking and handling
The installation of the Villagepump should be performed by at least 2 people to move and
install the Villagepump properly and safely.
Required tools for installation (this tools are included in standard delivery):
- open-end wrenches (10/11, 12/13, 16/17)
- screwdriver flat 4 - 6 mm
- Allen keys 3, 4 and 6 mm
In case of any doubts or questions, please contact your local distributor. Look for other
possible contacts or information at www.villagepump.org.
The standard package includes the following components:
- Villagepump
- Pump Handle (blue)
- Mesh Filter 0,05 millimetre
- Foot Plate
- Drain Hose, length 1 meter
- Inlet Nose, length 10 meter
Inside the Villagepump:
- Padlock
- Chlorine dioxide tablets (120 pcs of 1 gr or 30 pcs of 4 gr)
- Tool Set (Allen keys, wrenches)
- Grease (Silicon Compound)
- Hose Nipple and Hose Clamps (3x)
- Floater and Tie Wrap
- Spacers length 3 cm
- M8 bolt for mounting Pump Handle (2x)
- Self-locking M8 nuts and rings (4x)
- Manual
And optionally:
- Activated Carbon filter cartridge 20"
-
Wrench for 20” Activated Carbon housing
For specific client related reasons this standard configuration might have been changed.
Standard packaging Villagepump 500
