Visitor T30 C-DR
User's Manual
[File: 218899-01-01-B.docx]
Page 69/74
9.1.2
Detector model 3543 EZ
1. Switch the panel OFF.
2. Rotate the closing device (A) counterclockwise and
remove the battery (B).
3. Take a fully charged battery from the Battery
Charger (the complete recharge is indicated by the
switching ON of a green led), place the battery and
rotate clockwise the closing device (A).
4. Put the discharged battery back in the Battery
Charger.
The Battery Charger has some leds:
a green one, on the back of the Battery Charger,
indicates the presence of the mains
two leds per slot indicate the battery charge status:
flashing green led: battery under charge
fixed green led: completed battery charge
red led: interrupted charge, error during the charge
The duration and the complete charge of the
battery can degrade if the battery is removed before
ending the charge (green led always ON).
