33
c
4.2 Cleaning main brush and side brushes
CLEANING OF SIDE BRUSHES
Check the side brushes after every use and remove dust and dirt stuck to the sidebrushes. Maximum life span for
side brush is 12 months.
NOTE: Before replacing side brushes, please pay attention to the left mark and the right ( ‘L’/ ‘R’ ) mark on side
brushes, which match with the ‘L’/ ‘R’ mark on the bottom base of robot.
CLEANING OF SIDE BRUSHES
Release the clamp on the right side
of the main brush kit and take it out
of the robot
Open the main brush cover
1. Let the lid of the main brush face
yourselves.
2. Both hands thumb holding the lid
of the main brush, push the red
part up.
3. Remove the cover of main brush.
Take out the dust bin
Take out the high efficiency fine dust filter
Open dust bin cover, take out the primary
mesh filter
Empty the dust box
Wash the dust bin and primary mesh filter or
clean it with the maintenance brush. The
high efficiency filter can softly be beaten to
release fine dust gathered. Do not wash the
filter.
Install the primary filter and high efficiency
filter back into the dust box
TIPS FOR THE FILTER USAGE:
• Wash primary mesh filter after 15~30 days of use. maximum life span for filters is 12-24 months
• Re-install the dustbox and primary filter after they’re fully dry
• Do not dry the filters under intense sunlight directly
• Don’t wash the high efficiency filter under water
• Spare parts can be bought separately. further information can be found at the vileda service or on the
vileda website
!
