FEBERARY/06/2006
2 STEP DOOR UNLOCK WIRE CONNECTION FOR
GROUND SWITCHED DOOR LOCKS
Cut Existing Unlock
X
Lock
Unlock
OEM Door Master Lock Switch
To All Other
Door Lock
Motors
Pink Wire
OEM
Door Lock
Motor
Existing Neg.
Lock Wire
Existing Neg.
Unlock Wire
86
30
85
87
87A
+ 12V
Green Wire
Door Lock
Blue Wire
Door Unlock
OEM Door
Lock Relay
14-Pin
Plug
From
Alarm
3 Pin
Plug
To
Alarm
2 STEP DOOR UNLOCK WIRE CONNECTION FOR
POSITIVE SWITCHED DOOR LOCKS
Cut Existing Unlock
X
Lock
Unlock
OEM Door Master Lock Switch
To All Other
Door Lock
Motors
Pink Wire
OEM Driver's
Door Lock
Motor
+ 12V
Existing Pos.
Lock Wire
Existing Pos.
Unlock Wire
30
87A
87
86
85
+12V
+ 12V
OEM Door
Lock Relay
86
30
85
87
87A
Green Wire
Door Unlock
Blue Wire Door Lock
14-Pin
Plug
From
Alarm
3 Pin
Plug
To
Alarm
PROGRAMMING
A. PROGRAMMING THE REMOTE TRANSMITTER:
Note:
This mode will only retain the last 4 remote transmitters programmed. If the transmitter memory is
exceeded, the security system will start deleting transmitters from memory in chronological order.
1. Turn the Ignition 'switch ‘OFF/ON’ 3 TIMES and stay in ON position.
2. Within 15 seconds. push the Valet switch
3
times and holding in on
3rd
push until a long chirp is
hearing then release the valet switch. You are now in the Transmitter programming mode.
3. Press and hold any button of the transmitter until the siren responds with a confirming chirp, indicating
the signal has been stored into memory.
4. If you have additional transmitters (up to 4) that need to be programmed, repeat step 3 for each
transmitter.
Exit:
Turn Ignition to 'OFF' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to
confirm exit.
B.
ALARM FEATURE PRORAMMING
:
1. Turn the Ignition switch ‘ON then Off 3 TIMES and stay in Off position.
2. Within 10 seconds, push and release the Valet switch 4 times and holding in on the
4
th
push until one
long chirp from siren to confirm you are now in the Alarm feature-programming mode.
Press
button
Press
button Press
button
Press
button
Press and
release
Valet
Switch
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulses
Three Chirps /
LED three pulses
Four Chirps /
LED four pulses
One time
All chirps on
Siren chirp on only
Horn chirp on only
All chirps off
Two times
Active arming
Passive arming
without passive door
locking
Passive arming
with passive door
locking.
Three times
0.8-second Door
lock pulses.
3.5-second Door lock
pulse.
Double pulse
unlock
Door lock with
“Comfort Feature”
Four times
Ignition controlled
door locks &
unlocks
Ignition controlled
door locks only
Ignition controlled
door unlocks only
Without ignition
controlled door
locks & unlocks
Five times
Instantly Door Ajar
Warning
45 seconds delay
Door Ajar Warning.
Six times
Automatic Rearm
on
Automatic Rearm off
Seven
times
Override Without
Password Pin Code
Override With
Password Pin Code
VS3725IN
11
