7
Getting Started
Please use these setup instructions before attempting to use this hand mixer.
Failure to follow the instructions may result in injury or a void in the warranty.
Before Using the First Time
Before using the product for the first time, remove all attachments from
•
their packaging
Wash all attachments in the dishwasher or with warm soapy water and dry
•
with a clean dry towel
Assembling and Disassembling the
Hand Mixer Attachments
Make sure the unit is unplugged before installing or removing any attachments.
•
Insert the pair of wire beaters by aligning the shaft of the beater with the
•
proper slot on the underside of the hand mixer. The pair of wire beaters
includes one with a collar and one without. Insert the wire beater with collar in
the slot labeled . The pair of flat beaters (both with collars) may be inserted
in either slot on the underside of the hand mixer.
Remove the attachments by pressing the eject button on top of the hand
•
mixer. You may gently remove the attachments from the motor housing.
Insert
Collar
Beater
Eject
Button