34
Service Diagnostics and Procedures
© 2011 Viking Preferred Service
Interior Lights
To access the interior lights:
1. Open lid and unsnap the glass light cover using
a screwdriver in the access groove.
2. Firmly grasp light bulb and pull out.
3. Replace halogen bulb.
4. Replace light cover by snapping into metal box.
If bulb fails to illuminate, replace bulb. If bulb still
fails to illuminate, verify power to the socket. If no
power is present, verify source voltage, voltage at
light switch, and wiring. If no source voltage reset
breaker. If source voltage is proper verify light
switch. Switch should be open in the off position
and read 0
ї
in the on position. If switch is good,
verify wiring. If wiring is good and bulb still does
not illuminate, replace socket.
Grill Canopy
The E-series has a spring loaded counter weight
to aid in opening and closing of the canopy and
ensures even weight distribution.
To remove the canopy:
1.
Remove the two 5/16” shoulder bolts located
on the left and right side of the grill.
2. With the bolts removed, lift the canopy off grill.
Note
: VGIQ410-3RE2 model shown
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect gas supply and electrical power to unit
before servicing. After servicing, reconnect electrical power and gas supply.
CAUTION
DO NOT touch bulb with bare hands. Clean off
any signs of oil from the bulb and handle with
a soft cloth.
1
2
3
4
