Installation
7
8
Place the oven in front of the cabinet opening.
1
2
3
4
Black
Strain
relief
Red
Green
5
6
Connect green wire from oven to the supply cable
ground wire inside the junction box. Connect black and
red wires from oven to matching color wires from supply
cable in junction box.
Installation Procedure
Site Preparation
NOTE:
It is recommended that a thorough
site inspection be conducted PRIOR to
unpacking and moving this appliance.
*
Refer to the Use & Care Manual for
properly removing the door.
• Confirm available access to adequate
power – see electrical requirements.
• It is recommended that 3/4" or larger
material be utilized to create a support
platform for this appliance.
•
BE SURE
that support for this appliance is
perpendicular to the front facing of the
wall or cabinet before you perform the
installation.
• All openings in the wall behind the oven
or in the floor under the oven should be
sealed.
• Keep oven area clear and free from
combustible materials, gasoline and other
flammable vapors.
Professional Trim Kit
Professional Trim Kit
Professional Trim Kit
7A
7B
Designer Trim Kit
Designer Trim Kit
Designer Trim Kit
Open the oven door and attach the oven to the front of
the cabinet with 4 screws.
Open the oven door. Pass the trim kit over the door
towards the front of the cabinet.
Insert oven into the cabinet opening.
Push the oven in and against the cabinet until the lateral
holders of the oven touch the front of the cabinet. Avoid
pinching the conduit between the oven and the wall. Be sure
the oven is placed at the center of the opening.
Feed the flexible cable conduit from the oven through
the opening in the cabinet.
Remove the junction box cover.
W A R N I N G
DO NOT
use the handle or appliance
door to lift the appliance. Remove door
before installation to ensure that it is not
used to lift the unit.
Do not lift or carry
the door by the handle.
W A R N I N G
DO NOT
use an extension cord with this
appliance. Such use may result in fire,
electrical shock or other personal injury.
