To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit, unless test
procedures require power to be connected. Discharge capacitor through a resistor before attempting to service.
Ensure all ground wires are connected before certifying unit as repaired and/or operational.
WARNING
!
Disassembly
20
©2012 Viking Preferred Service
FIG 11 and FIG 12 show the left front screw location accessed through the light bulb
openings. This view is looking forward from inside the hood. Suggest using a handheld
mirror to locate screws while disassembling and reassembling.
FIG. 11
FIG. 12
Lift the control panel compartment from inside the hood to access the Light sockets,
control switches, High Temp Thermostat, Speed Control and light dimmer. FIG 13 shows
the internal compartment, which houses the incoming power, Dimmer control, Speed
Control, On / Off switches and High Temperature thermostat.
FIG. 13