5
General Information
• This Built-in Kit is designed for use only with
Viking Microwave Ovens specifying built-in kit
VHTK75SS, VHTK305SS or VHTK365SS on the
rating label on the oven cavity.
• All openings in the wall behind the appliance
or in the floor under the appliance should be
sealed.
• Keep appliance area clear and free from
combustible materials, gasoline and other
flammable vapors.
• When removing the appliance for service,
disconnect AC power supply and carefully
remove the appliance by pulling forward.
•
CAUTION:
The oven is heavy – use care when
handling!
• The electrical requirements for this oven are 40
volts, 15 amps. The oven has a 6-15 plug and
requires a 6-15 receptacle.
Recommendations for
Unpacking
• DO NOT remove protective packaging until you
are ready to perform the installation.
• DO NOT remove the protective wrapping from
the product control panel until the product is
installed.
Recommendations for
Moving
• The appliance is heavy – use extreme care when
handling!
•
WARNING:
DO NOT
use the handle or oven
door to lift the oven.
Site Preparation
Note:
It is recommended that a thorough site
inspection be conducted PRIOR to unpacking and
moving this appliance.
• Confirm available access to adequate power
– see electrical requirements on page 4.
• It is recommended that 3/4" or larger material
be utilized to create a support platform for this
appliance. The floor must support 150 lbs.
• BE SURE
that support for this appliance is
perpendicular to the front facing of the wall or
cabinet before you perform the installation.
• All openings in the wall behind the appliance
or in the floor under the appliance should be
sealed.
• Keep appliance area clear and free from
combustible materials, gasoline and other
flammable vapors.
• WARNING:
DO NOT
USE AN EXTENSION
CORD WITH THIS APPLIANCE. SUCH USE
MAY RESULT IN FIRE, ELECTRICAL SHOCK OR
OTHER PERSONAL INJURY.
Installation
