Viking MR 4082, Instruction Manual

Page: 78 / 420

0478 193 9902 A - EN
76
2 Enable with the mowing deck
engaged:
● Briefly press the reverse mowing safety
switch once with the left foot during
mowing operation.
● Switch to reverse driving direction
within 5 seconds and continue mowing.
(
Ö 8.5)
Reverse mowing can also be enabled
up to 1 second after changing the
driving direction.
8.5 Driving direction selector lever
The driving direction is selected
using the driving direction
selector lever.
The ride-on mower drives in the
selected direction after the drive pedal is
actuated – actuating the driving direction
selector lever alone does not set the
machine in motion.
Selecting the driving direction:
Forward driving direction:
Move the driving direction selector
lever (1) to the front position.
Reverse driving direction:
Move the driving direction selector
lever (1) to the rear position.
8.6 Steering wheel
Turning the steering wheel (1) to the left L
or right R changes the driving direction of
the machine.
The further the steering wheel (1) is
turned, the smaller the turning radius.
8.7 Driver's seat adjustment lever
The seat can be adjusted to
seven notched positions.
● Stop the engine. ( Ö 12.3)
● Sit on the driver's seat and put one
hand on the steering wheel.
With the other hand, lift and hold driver's
seat adjustment lever (1).
If the reverse mowing safety switch
is continuously pressed, the switch
must be released within the time
window and pressed again.
For safety reasons, the driving
direction selector lever is locked
when the drive pedal is pressed.
Therefore release the drive pedal
before actuating the driving
direction selector lever.
Warning:
Always hold the steering wheel
firmly in both hands when driving.