0478 111 9911 B - EN
15
11,
#
7
7
14, 15
5
5
7
10
,
#
,
#
11,
#
,
#
5
12
14, 15
10, 12,
,
7,
12
6
Fault
Possible cause
Remedy
Page
Illustration
- Poor cutting pattern
- Mowing blade is blunt or worn
- The rate of feed is too high in
relation to the cutting height
- Housing is not parallel to
ground
- Re-sharpen or replace mowing
blade
- Reduce rate of feed and/or
select correct cutting height
- Set the rear wheel cutting height
adjustment and the front wheel
cutting height adjustment to the
same cutting level
- Engine overheating
- Dirty cooling ribs
- Oil level in engine too low
- Clean cooling ribs
- Top up engine oil
- Work at appropriate cutting
height and mowing speed for
mowing conditions
- Clean mower housing
(disconnect spark plug socket
before cleaning)
- Clean air filter
- Clean spark plug
- Re-sharpen or replace mowing
blade
- Empty fuel tank, clean fuel line
and carburettor
- Mowing grass which is too long
or too wet
- Mower housing is blocked
- Dirty air filter
- Dirty spark plug
- Mowing blade is blunt or worn
- Water in fuel tank and
carburettor; carburettor blocked
- Starting problems or
deteriorating engine power
see engine instruction manual
#
if necessary, contact authorised customer service
EN
FR
NL
IT
ES
PT
NO
SV
FI
DA
PL
HU
SR
HR
DE