PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
LRR-4 / LRT-4
Long Range 4 Channel
Receivers / Transmitters
September 18, 2018
VIKING
Features
Applications
Specifications
Long Range 433 MHz Four Channel Transmitters
and Receivers with up to 400 ft* Range
Viking’s model
LRR-4
Long Range 4 Channel Receivers with
integrated receive antenna and
LRT-4
Long Range Wireless 4
Channel Radio Transmitters comprise Vikings high frequency, long-
range (RFID) identification solution. Intended for security access
control applications, the
LRT-4
’s wireless communication is based
upon a secure, digital, anti-playback routine. The
LRT-4
Transmitters have four buttons, each corresponding to its own
Wiegand output on the
LRR-4
Receiver. Each Transmitter includes
an integrated red LED, used to indicate both positive button press
and battery strength. They are also equipped standard with a
125 KHz HID** compatible potted proximity module allowing the
Transmitter to also be used as a close range access credential.
The transmitters and receivers operate at 433 MHz allowing a
transmission range of up to 400 ft (line of sight). The
LRR-4
receiver
has an adjustable read range, optional external antenna connector,
terminal block with 4 channel Wiegand data output and a transducer
and LED to confirm transmitter button press. The
LRR-4
has a
conformal coated circuit board mounted in a NEMA 4, 4x rated box
for use in outdoor applications.
ATTENTION: When ordering LRT-4 Transmitters, quantity,
Facility Code, starting Transmitter, and Proximity Module
Number must be specified. Please use the attached order
form on page 4.
LRR-4
LRT-4
SOLD
SEPARATELY
LRT-4 Long Range Transmitter
• Read range of up to 400 ft (line of sight)
• Convenient key fob design
• 4 buttons to activate up to 4 different Wiegand devices
• Secure, Rolling Code + Encryption, digital, anti-playback wireless
transmission
• Integrated 125 KHz proximity module for close range access credential
(can be used with Viking Proximity card readers and certain 125 KHz HID** readers)
• Replaceable CR2032 battery lasts up to 500,000 button presses
• Robust buttons rated for up to 1 million activations
• LED to indicate button press and battery strength
• Internal diaphragm / gasket seals circuit board from moisture and debris
• CE mark
LRR-4 Long Range Receiver
• Read range of up to 400 ft (line of sight)
• Secure, digital, anti-playback wireless communications
• 4 channels of 26 bit Wiegand data output
• Optional external antenna connector
• LED and transducer transmitter feedback
• Adjustable read range
• Removable terminal block for easy wiring
• Cable grommet included for sealing cable exit
• CE mark
*
Up to 400ft line of sight range
**
HID and the HID logo are registered trademarks of HID Global Corporation, an ASSA
ABLOY company. All other trademarks are the property of their respective owners.
Use with the following Viking models to remotely activate
relays for door/gate control, etc:
www.vikingelectronics.com
Information: (715) 386-8861
Model
Description
DOD
AES-2000
Accessible Entry System (with ES-3 controller)
202
AES-2005
Accessible Video Entry System (with ES-3 controller)
204
C-4000
Apartment / Office Entry Controller
164
ES-1
Stand Alone Keyless Entry System
193
ES-3
Entry System Controller (requires power adapter)
195
K-1200-IP
VoIP 12 Button Apartment Entry Phone
271
K-1205-IP
VoIP Apartment Entry Phone with Camera
272
K-1270-IP
VoIP Entry Phone with Card Reader
273
K-1275-IP
VoIP Entry Phone with Camera and Card Reader
274
K-1700-IP
VoIP Entry Phone with Keypad
253
K-1705-IP
VoIP Entry Phone with Keypad and Camera
254
K-1770-IP
VoIP Entry Phone with Keypad and Card Reader
257
K-1775-IP
VoIP Entry Phone with Keypad, Camera, and Card Reader
258
K-1770-3
Entry Phone with Keypad and Card Reader
275
K-1775-3
Entry Phone with Keypad, Camera, and Card Reader
280
K-1900-8-IP
VoIP Entry Phone with Handset and Keypad
361
Shipping Weight: LRR-4
= 0.81 lb
LRT-4
= 0.1 lb
(see page 2 for complete specifications)
