RECOMMENDED FLUIDS
LOW SMOKE FLUID
The "Molecular Fluid" was originally designed for use in the LSX and LSG, however, many other applications
were found very quickly. It is a clean, white, thick fog, practically odourless and dissipates as it begins to warm.
MAINTENANCE
The only interior maintenance required for the Freezefog is that the hose end of the Liquid Carbon Dioxide
supply line be kept clean and free of debris. When not in use keep the supply line hose end capped or covered
to prevent debris from entering and insects from nesting inside the line.
EXTERIOR
The exterior of the Freezefog requires only mild soap and water to clean.
Warning:
Le Maitre Ltd considers all its products to be safe for use in the application it was intended. Le Maitre Ltd takes
no responsibility for misuse or incorrect use. Always refer to equipment owner’s manual for proper use.
SAFETY PRECAUTIONS
1. Ensure that operation of the machine is supervised by suitably trained and authorized personnel.
2. Do not modify the machine or use a machine which has been damaged in any way.
3. Allow sufficient air circulation around the machine at all times.
4. Protect the Gforce3 from direct weather effects and wet locations.
5. Only use fluids recommended by the Manufacturer.
6. Do not continue to produce Fog output in an enclosed area when visibility is reduced below 50cm.
7. Avoid direct Fog output continuously at persons, structure or objects within close proximity of the discharge
nozzle.
8. Ensure that adequate exhausting arrangements are available in the event of an emergency.
9. Do not place hands, or exposed skin within the first 50cm of the discharge nozzle at any time during fog
production.
Please return this manual with your hire or a charge of £5 will be made
Page 6
If in doubt, please call Viking Stage Lighting:
Office Hours (01603) 401982
Out of Hours (07894) 758256 or (07770) 422112
If no Mobile Reception then email [email protected] - monitored 24 hours a day
