Le Maitre Freezefog - Overview
The Freezefog needs a liquid CO2 supply. Either high or low pressure, although better results are obtained with
low pressure.
The Freezefog Pro requires a Le Maitre smoke machine that is Freezefog enabled. This is found in the GGforce3.
Any other machine is not suitable for use.
The smoke machines require Low Smoke fluid. You must ONLY use this as it is designed to bond with the CO2
on a molecular level. CO2 is a colourless, odourless gas. It is only seen when the refraction density is altered.
In the past, water was used with solid CO2, which worked well but tended to leave the area damp and slippery.
The Freezefog works by adding Low Smoke fluid from the smoke machine to the liquid CO2 injected into the
Freezefog. The result is proper Dry Ice Low Smoke. The only difference being there is no dampness associated
with the effect.
The unique partnering of a fog effect with liquid C02 is cost effective and provides a longer lasting effect.
Designed to be utilised with the Freezefog Pro, the Le Maitre Low Smoke Fluid provides a dry, thick, white effect
with a consistent dissipation that eliminates any ambient hazing. The Freezefog couples with the Le Maitre smoke
machine, offering the most advanced controls and fog output available. The Freezefog consumes approximately
3.5 kilos of liquid carbon dioxide per minute of operation at 350 PSI (25bar). At the typical variflow setting of 20
the Gforce3 will consume approximately 4 litres of fluid per hour constant.
The system can be controlled via the standard digital remote control or DMX. The DMX Interface allows the
Freezefog & Gforce3 to be controlled on separate DMX channels. Standard equipment includes 10" ducting sleeve
to facilitate standard ducting in many configurations based on fog distribution requirements.
WARNING
F
Keep this device dry to prevent danger of electric shock.
F
Do not remove the outer case until power has been disconnected from the machine.
F
Use in 3-pin earthed electrical outlets only.
F
Turn off power when not in use.
F
For adult use only.
F
Do not touch, place hands or expose skin within 10cm of nozzle.
F
Persons suffering from asthma or allergenic sensitivity may experience irritation, discomfort or
allergic symptoms when exposed to heated fog effects.
F
Never use alternative fluids. Toxicity free output is your responsibility.
TECHNICAL SPECIFICATIONS
Model:
Freezefog Pro
Type:
CO2 Operated Fog Chilling Unit, couples with Le Maitre Freezefog enabled
smoke machine.
Size:
Height:
61cm
Width:
50cm
Depth:
65cm
Weight:
17.5kg (not including smoke machine)
Power Rating:
220 VAC, 50/60 Hz, 10 Amps (with Gforce3 smoke machine)
Please return this manual with your hire or a charge of £5 will be made
Page 1
M92
Le Maitre Freezefog Pro
OPERATOR’S MANUAL
