Viking K-2000-DVA, Product Manual

Page: 5 / 8

D. Security Code (memory location #90)
C. Quick Programming Features
Step 1.
Access programming as shown in
Programming section A .
Step 2. Enter 654321 #90 .
Step 3. Exit Programming as shown in section A .
* X is an input number (1-8) and Y is the dialing order (1-8) of the eight memory locations for this input.
The security code allows the user/installer to program the K-2000-DVA
remotely. The factory set security code is 845464 (V-I-K-I-N-G). It is
recommended that the security code be changed.
Example: To store 654321 as the security code, see right:
Note: The security code must be 6 digits, cannot include a
Q
or a # ,
and cannot be set the same as the remote access code.
E. Selecting Function
The K-2000-DVA can function as either an Alarm Dialer or a Store Caster. To select the Alarm Dialer mode enter ##1 . To select
the Store Caster mode enter ##2 .
Description Enter Digits + Location
To enter phone numbers for each input ......................................................................... 1-32 digits + #XY*
To clear a phone number ................................................................................................. (no digits) + #XY*
To enter pager numbers ................................................................................................. 1-32 digits + #
Q
XY*
To play message for any input ..........................................................................................
Q
0X*
Contacts: First digit - 0 = NO, 1 = NC , 2 = enabled, 3 = disabled
Second Digit - 0 = momentary closure, 1 = continuous closure ...................
2 digits + #X9*
Repeat/Lap Counter: First two digits - message repeat counter (01-99)
Last two digits - lap counter (01-99) ...........................................
4 digits + #X0*
To program the Qualifier Timer (HHMMSS, 18 hour maximum) ...................................... 6 digits + #X
Q
*
To program the Resume Operation Timer (HHMMSS, 18 hour maximum) ....................... 6 digits + #X#*
To program the Security Code .......................................................................................... 6 digits + #90
To program the Access Code ............................................................................................ 6 digits + #91
To program the Ring Delay (0-9) (0 = ring detection disabled) ....................................... 1 digit + #92
To program the Ringback Limit (01-99) .......................................................................... 2 digits + #93
To program the Forced Play Timer (01-99 seconds) (00 = clear) ................................... 2 digits + #94
To record messages for each input (1-8) ......................................................................
Q
1 -
Q
8
To clear one message ....................................................................................................
Q
1 -
Q
8 then immediately press any digit
To add a 4 second pause anywhere in the dialing string .................................................
Q
9
To add a
Q
anywhere in the dialing string .......................................................................
QQ
To add a # anywhere in the dialing string ........................................................................
Q
#
To set to alarm dialer mode ................................................................................................ ##1
To set to store caster mode .............................................................................................. ##2
To set to normal dialing speed ....................................................................................... ##3
To set to fast dialing speed.............................................................................................. ##4
To program no hookswitch flash before dialing .............................................................. ##5
To program a 500ms hookswitch flash before dialing .................................................... ##6
To hang up ...................................................................................................................... ##7
To return programming to defaults ..................................................................................... ###
F. Remote Access Code
G. Ring Delay
Enter a six-digit access code followed by #91 . Note: The remote access code must use only the digits 0-9, cannot contain
Q
or # ,
and cannot be set the same as the security code.
Enter one digit from 0-9 followed by #92 . If the ring delay is set to 0 , ring detection is disabled, so that the K-2000-DVA will not
answer incoming calls. It is important to note that this prevents Remote Access and Remote Programming.
H. Ringback Limit (does not apply in Store Caster Mode
I. Selecting Dialing Speed (does not apply in Store Caster Mode)
To select normal dialing speed (120 ms) enter ##3 . To select fast dialing speed (50 ms) enter ##4 .
Enter two digits from 01-99 followed by #93 .
J. Forced Play Timer and Call Progress Detection (does not apply in Store Caster Mode)
Call Progress Detection is enabled by setting the Forced Play Timer to 0, which is done by entering the two digits 00 followed
by
#94 . Call Progress Detection is disabled by setting the Forced Play Timer to a non-zero value from 1 to 99 seconds. Enter
a two digit number from 01- 99 followed by #94 .
5