I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
The
K-1205
can be powered from any source supplying 12 to 24 volts, AC or
DC. A 12 volt DC adapter is supplied with the product. When using the includ-
ed adapter, the plug on the adapter cord will have to be removed. The power
connections to the
K-1205
(black wires) are not polarity sensitive.
There are also 8 more wires connected to the
K-1205
controller board. Two
wires are for the incoming phone line, three are from the high current door
strike relay and the last three are from the camera relay. Gel filled butt con-
nectors are provided for easier connection to building wiring. The table at the
right describes each wire’s function.
VIKING
©
0
#
*
9
8
7
6
5
4
3
2
1
10.14"
3.69"
5.22"
10.0"
9.5"
4.50"
2.596"
5.00"
8.65"
0.425"
0.952"
9.12"
2.5"
4.5"
- or -
Zinc-Plated Steel
Rough-In Box (included)
Side View
of the K-1200
Front View
of the K-1205
(8) #6-32 x 3/4"
Marine Grade
Stainless Steel
Flathead, 5/64"
Hexdrive Screws
(included)
14 Gauge Marine Grade 316
Stainless Steel Faceplate
Optional VE-5x10 Surface
Mount Box (not included),
see DOD# 424
Color
Black
Black
Green
Red
Brown
Orange
Yellow
Blue
Violet
White
Function
Power In
Power In
Phone Line In
Phone Line In
Door Strike Relay common
Door Strike Relay NC
Door Strike Relay NO
Camera Relay common
Camera Relay NC
Camera Relay NO
A. Mounting
To install a directory, remove the four screws that mount the directory
lens to the front of the
K-1205
using the included Allen wrench. Insert
a paper directory behind the lens and secure the two back onto the
front panel being careful to align the names with the front panel graph-
ics. For your convenience, the back of this document has pre-printed
directory forms.
B. Changing the Directory
C. Wiring the K-1205 Controller Board
The
K-1205
is designed to be
installed in a sheltered location, and
is not meant to be used outdoors.
For outdoor applications use the
K-
1205-EWP
. The
K-1205
can either
be installed as a flush mount unit
using the included rough in box, or
as a surface mount unit using an
optional
VE-5x10
. The rough in box
uses the inner set of four holes on
the face plate while the
VE-5x10
uses the outside set of holes. A set of
dummy screws and nuts are provid-
ed to fill the unused mounting holes.
IMPORTANT:
Electronic devices are susceptible to lightning and power station electrical surges from both the AC
outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.
!
Paper Directory
Directory
Lens
3
D. Wiring the K-1205 Camera
1. Using RG59 for Video and CAT5 for Camera Power (Recommended)
V
IK
IN
G
Model: xxxxxxxxx
P/N: xxxxxxxxx
S/N: XXXXXX
Viking Electronics, Inc. (715)386-8861
1531 Industrial St., Hudson, WI 54016
DEV:
RoHS
Back View of
the K-1205
** Camera Pwr (+)
Orange
** Camera GND (-)
W/O
Yellow (Video)
3-Wire Gel-Filled Butt
Connectors included
(3M Scotchlok UR2)
CAT5 Cable
To unused input on TV,
VHF modulator, whole
house video distribution
equipment, IP video
encoder (Axis M7001), etc.
120V AC
Camera GND (-)
Camera Power (+)
Black with
White Stripe
5V DC Adapter
(included)
Black
(-)
!
(+)
W/O
Orange
*** RG59 or RG6 Shielded
Video Cable, up to 1000 ft
Center conductor
stripped back 5/8"
Twisted foil and braided shield
** Up to 250 ft
"F"
Connector
"F" to Phono Plug
Adapter
(Radio
Shack part #278-252)
- Black (GND)
+ Red (6VDC)
Crimp-on Splice
Connectors (not included)
Black
OR
Yellow/Red
**** Female "F" to Wire or "BNC" to Wire
Converter Cable
(not included)
**** For ease of installation, a Viking Female
"F" to Wire Converter Cable can be used (Part
# 261217) or "BNC" to wire converter cable
(Part # U213510) can be used. Go to
www.vikingelectronics.com and click on
"Spare Parts" to order.
IMPORTANT:
Electronic devices are susceptible to lightning and power station electrical surges from both the AC outlet and the telephone line.
It is recommended that a surge protector be installed to protect against such surges.
!
Important:
To operate the
K-1200
during a power failure, a UPS should be installed.
