manualshive.com logo in svg

Viking Huskystar C10, User Manual, Page: 9 / 72

Share
Download
Viking Huskystar C10 User Manual Download Page 9

9

B. Function buttons

4. Stitch 

length

 

Press this button to adjust the length of the stitch.

5. Stitch 

width

 

Press this button to adjust the width of the stitch.

6. Pattern 

mirroring

 

Press this button to sew a mirrored pattern.

 

7. Mode 

selection

 

Press this button to select direct mode, utility and decorative pattern mode or block letter mode.

C. Memory buttons

8. Clear 

button

 

If an incorrect pattern is selected or programmed, pressing this button will clear it. 

9. Arrow 

button

 

Press the “ 

 “ button or “ 

 “ button until the desired stitch number in the programmed 

combination is displayed.

10. Memory button

 

Press this button to enter or store the programmed pattern combination in the memory.

D. Selection buttons  

11. Direct pattern selection and number buttons

 

Instant access to direct pattern or press the pattern number to select the desired pattern.

Summary of Contents for Huskystar C10









































































Reviews:

No comments