Reverse dimensions
for other end.
1/2”
(1.27 cm)
1-1/2”
(3.81 cm)
1/4” Radius
(.64 cm)
2-3/4”
(6.98 cm)
1/2”
(1.27 cm)
3/4”
(1.90 cm)
1/2”
(1.27 cm)
1/8”
(.31 cm)
1/2”
(1.27 cm)
1/4” Radius
1/
4”
Ra
diu
s
(1.2 cm)
(1.
2 c
m)
1/4” Radius
(.64 cm)
7/8”
(2.22 cm)
1/2”
(1.27 cm)
34”
(86.36 cm)
34”
(86.36 cm)
3/4”
(1.90 cm)
1/2”
(1.27 cm)
3/4”
(1.90 cm)
3-3/4”
(9.52 cm)
3-3/4”
(9.52 cm)
3-5/8”
(9.20 cm)
33-15/16”
(86.20 cm)
3”
(7.62 cm)
3”
(7.62 cm)
3/4”
(1.90 cm)
35-1/2”
(90.17 cm)
1/2”
(1.27 cm)
3-1/8”
(7.93 cm)
Optional hinge cover
32-3/16”
(81.75 cm)
5-17/32”
(14.10 cm)
4-11/64”
(10.59 cm)
30-27/32”
(78.34 cm)
3-25
/32
”
(9.60 cm)
27
/32”
(.84 cm)
9/16”
(1.42 cm)
1/4”
(.635 c
m)
16.5˚
20.
0˚
2-1/8”
(5.4 cm)
Custom Grille Dimensions
(Bottom-Freezer)
35-1/4”
(89.5 cm)
23-1/16”
(58.6 cm)
3/4”
(1.9 cm)
35-1/4”
(89.5 cm)
32-1/4” to notch
(81.9 cm)
5/8”
(1.6 cm)
51-7/8”
(131.8 cm)
51-1/4”
(130.2 cm)
3/4”
(1.9 cm)
Note:
Cor
ner notch is for left
hinge door
. Reverse for right hinge.
See page 54 for cutout instruct
ions.
1-13/16”
(4.60 cm)
5/8”
5/8
”
(1.6 cm)
(1.6 c
m)
3”
(7.62 cm)
3/32”
(.24 cm)
5/8
”
5/8”
(1.6 cm)
Note:
Inset shown
upside down.
Overlay Dimensions
(Bottom-Freezer)
11
10
36” Custom Panels
36” Custom Grille
Note:
Panel overlays must be dry, solid, straight
one-piece panels. The use of multiple panel
pieces to achieve the dimensions is not
recommended.
Note:
Optional hinge cover can be attached
using a strong VHB tape, countersunk wood
screws or short nails from a nail gun.