1. Place the PLAY/REC switch in the PLAY position.
2. Plug a standard carbon handset into the modular REC/MON jack.
3. Position the Port Selector to the announcement you wish to monitor.
3. Press and hold the START switch for the duration of the announcement.
4. When finished release the START switch.
Note: While playing or recording, the “LED” will display a steady light.
1. Place the PLAY/REC switch in the REC position.
2. Insert a 3.5mm (1/8”) audio jack into the TAPE jack.
3. Connect the other end of the cable assembly to the speaker, monitor, earphone, etc. jack of a standard cassette
recorder.
4. Select the message you wish to record on the Port Selector switch (1 or 2)..
5. Adjust the audio level of the tape player by following a-b.
a. Play the recording but do not push START.
b. Adjust the cassette player volume so that the LED flickers but is not mostly on or off.
6. Press and hold the START switch for the duration of the recording.
7. When finished release the START switch.
8. Repeat steps 4 - 6 to record a second message.
9. Move the PLAY/REC switch to the PLAY position.
Printed in the U.S.A.
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking
Electronics, its affiliates and/or subsidiaries assume no responsibility for errors and/or omissions contained in this information. Revisions of this
document or new editions of it may be issued to incorporate such changes.
Product Support Line...(715) 386-8666 Fax Back Line...(715) 386-4345
Fax Back Doc # 120
ZF290180 Rev B
Operation
F. Recording From a Carbon Handset
1. Place the PLAY/REC switch in the REC position.
2. Plug a standard carbon handset into the modular REC/MON jack.
3. Select the message you wish to record on the Port Selector switch (1 or 2).
4. Press and hold the START switch and begin speaking as if you were talking on the telephone.
5. When finished release the START switch.
6. Repeat steps 3 - 5 to record a second message.
7. Move the PLAY/REC switch to the PLAY position.
H. Monitoring From a Carbon Handset
G. Recording From a Tape Player
3.5mm (1/8”) audio jack permits down-
loading the message from a tape player.
Start Button
Record/Play Selector
Port Selector
Playback Volume Adjustment
“In Use” and “Record Level” Indicator
VIKING
©
Digital Announcer
Model DVA-1002
REC/MON
VOL
Viking Electronics, Inc. Hudson WI 54016
PLAY REC
START
TAPE
LED
Standard carbon handset to record and monitor
Note: electrocet handsets will not work.
1 2
With the Port Selector in position 1, all incoming calls on line 1 (R/G of J2) will hear message 1. All incoming calls on
line 2 (Y/BK of J2) will hear message 2.
Note: Both messages cannot be accessed simultaneously.
With the Port Selector in position 2, all incoming calls will hear message 2.
