Viking DrawerMicro DMOD241SS Installation Manual Download Page 2

E2

IMPORTANT–Please Read and Follow!

•  Before  beginning,  read  these  instructions 

thoroughly and carefully.

•  Because  the  kit  includes  metal  parts,  caution 

should be used in handling and installation to 
avoid the possibility of injury.

•  Do  not  remove  permanently  affixed  labels, 

warnings or plates from the product as this may 
void the warranty. 

•  Observe all local and national codes, requirements 

and ordinances. 

•  Installers should leave these instructions with the 

consumer who should retain them for the local 
inspector’s use and for future reference.

•  For  SAFETY  CONSIDERATIONS  do  not  install 

drawer  in  any  combustible  cabinetry,  which  is 
not  in  accord  with  the  stated  clearances  and 
dimensions on page 4, See FIGURE 1.

IMPORTANT SAFETY 

INSTRUCTIONS

 

• WARNING:

 If the information in this manual is 

not  followed  exactly,  a  fire  or  electrical  shock 
may result that could cause property damage, 
personal injury or death.

• WARNING:

  To  reduce  the  risk  of  tipping, 

the  DrawerMicro  Oven  must  be  secured  by  a 
properly installed Anti-Tip block.

•  This appliance must be electrically grounded in 

accordance with local codes.

•  Make sure the wall coverings and the cabinets 

around the DrawerMicro Oven can withstand the 

heat generated by the appliance.

• WARNING:

  Never  leave  children  alone  or 

unattended  in  the  area  where  a  appliance  is 
in use. Never leave the drawer open when the 
microwave is unattended.

• WARNING:

 Stepping, leaning or sitting on the 

drawer may result in serious injuries and can also 
cause damage to the appliance.

• Do not use the DrawerMicro Oven as a storage 

space. 

This  creates  a  potentially  hazardous 

situation.

•  Check that the time-of-day is in the display. If not, 

touch 

Stop/Clear 

to prevent unintended use.

DO NOT USE AN EXTENSION CORD WITH 

THIS APPLIANCE. SUCH USE MAY RESULT 

IN FIRE, ELECTRICAL SHOCK OR OTHER 

PERSONAL INJURY. 

ELECTRICAL GROUNDING INSTRUCTIONS 

This oven must be electrically grounded in 

accordance with local codes or, in the absence 

of local codes, with the National Electrical 

Code, ANSI/NFPA 70 – latest edition.

Summary of Contents for DrawerMicro DMOD241SS







Reviews: