25
Service Diagnostics and Procedures
© 2011 Viking Preferred Service
Terminal Block with Clamp
To access Block with Clamp:
1.
Remove main top
(see Main Top Access section,
page 16).
2. Remove securing screws. Slide cover forward to
remove.
3. Remove wiring connectors from terminal block.
4. Remove terminal block securing screws from
the outside of cooktop.
5. Rotate terminal block to gain access and loosen
clamp screw.
6. Remove and repair/replace terminal block as
necessary.
Note:
Loosen power cord screws if removing power
cord from terminal block.
7. Reverse procedure to reinstall.
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect gas supply and electrical power to unit
before servicing. After servicing, reconnect electrical power and gas supply. Before placing appliance into
operation, always check for gas leaks with soapy water solution.
DO NOT
USE AN OPEN FLAME TO
CHECK FOR GAS LEAKS.
Screw
Power Cord
Screw
Screw
Connectors
Clamp
Power Cord
Terminal Block
Screw
Power Cord
Clamp
Terminal Block
