2
GENERAL INFORMATION
Unpack
1. Remove banding from bottom of carton. Lift carton up and off of the unit.
2. Remove all tape and packaging material from the outside and inside of the cabinet.
3. Keep all carton packaging until your wine cooler has been thoroughly inspected and found to be in good
condition.
AREA REQUIREMENTS
1. Place unit so the front side will be completely unobstructed to provide proper air flow. The unit may be closed in
on the top and three sides, but the front M
MU
US
ST
T B
BE
E unobstructed for air circulation and proper operation.
Installation should be such that the cabinet can be moved for servicing if necessary.
2. Unit should be in a well ventilated area. Best results are obtained at temperatures between 65
0
F (18
0
C) and 80
0
F
(27
0
C) for built-in models and 65
0
F (18
0
C) and 90
0
F (30
0
C) for freestanding models.
3. Provisions for electricity should be determined before placing unit in proper place.
A
B
C
UNDERCOUNTER CABINET
CUTOUT
A
A
24” (61.0 cm)*
B
B
Min. 34 1/8” (86.7 cm)
Max. 35 1/8” (89.2 cm)
C
C
24” (61.0 cm)
*24” width for cabinet only. If door is
recessed between cabinets, cabinet cutout
must be 24-1/4” (61.6 cm)
