3/4”
(1.9 cm)
End panel
1”
(2.5 cm)
1/4”
(0.6 cm)
Z-Bracket
21
-3/
4”
(55
.2
cm
)
21
-3/
4”
(55
.2
cm
)
24
”
(61
.0
cm
)
Optional kickplate notch
Dimensions determined by cabinets
24
”
(61
.0
cm
)
82-7
/8”
(210
.5 c
m) m
in.
to
84-1
/16
”
(213
.5 c
m) m
ax.*
82-7
/8”
(210
.5 c
m) m
in.
to
84-1
/16
”
(213
.5 c
m) m
ax.*
Custom Side Panel Dimensions
45
* Depending on how high leveling feet are raised, and cabinet enclosure height.
Note:
Adding 3/4”
(1.9 cm) side panels
adds an additional
3/4” (1.9 cm) to the
overall width of the
product for each side
panel used.
Note:
Requires side
panel hardware kit
(SPHKDS).
46
Ice and Water Dispenser Bezel Removal (if required)
Remove packaging material surrounding bezel.
Grasping the sliding lever, pull away from bezel.
Remove spill tray form lower part of bezel
exposing two screws.
Remove screws.
1
2
4
3
Custom Panel General Information
Custom finishing options
• All installations must allow for the refrigerator ad freezer door to open a minimum of 90˚.
• For side wall or corner installation, allow for a standard 3” (7.6 cm) cabinet filler to assure
door(s) open 90˚.
Note
:
If a custom handle is used a wider filler may be necessary.
• Panel thickness must not exceed 1”
(2.5 cm) on hinge side. Thicker panels will interfere with door swing and clearance.
• A 1/4” wood filler or insulation filler must be used between the door and 3/4” wood panel to
prevent condensation from forming.