34
Align the holes on both ends of the louvered panel
with the holes in the base of the refrigerator.
Adjust the kickplate to the desired height and fasten
in place by tightening the screws in the slot. Attach
the kickplate to the refrigerator on each side with the
two black phillips head screws provided.
DOOR STOP ADJUSTMENT
1. Using a 3/16” allen wrench, remove door stop pin located in bottom hinge.
2. The pin is factory set 110
o
. For 120
o
swing, move the pin to the utmost forward stop hole. For 90
o
swing, move the
pin to the utmost rear stop hole.
HINGE ADJUSTMENT
1. Using a 3/16” allen wrench, remove the door stop pin located in bottom hinge.
2. Using the height adjustment shim as a wrenching device, rotate the height adjustment bushing counterclockwise to
raise or clockwise to lower the location of the door.
3. When proper adjustment is reached, align shim with door stop pin holes and replace door stop pin. Firmly tighten
pin in place.
Attach to unit with
screws
(on both ends)
Slots for
adjustments (on
both ends)
Door stop
pin
120
o
position
90
o
position
KICKPLATE INSTALLATION
