13
General Information
READ AND FOLLOW ALL WARNING
AND CAUTION INFORMATION WHEN
INSTALLING THIS APPLIANCE.
• Keep appliance area clear and free from
combustible materials, gasoline and other
flammable vapors.
• Disconnect the electrical supply prior to
servicing or cleaning.
• When removing the cooktop for service
and/or cleaning, disconnect AC power sup-
ply.
• Electrical requirements are listed in the
product specifications under the “Electrical
Requirements” section.
Installation
1
HO
T
RE
AR
FR
ON
T
HO
T
RE
AR
FR
ON
T
2
Ground
Green
Black
Red
Lower cooktop into cutout.
Connect the red and black leads from the unit conduit
to the corresponding leads in the junction box.
Cooktop
Bracket
Countertop
3
HO
T
RE
AR
FR
ON
T
HO
T
RE
AR
FR
ON
T
HO
T
RE
AR
FR
ON
T
HO
T
RE
AR
FR
ON
T
4
HO
T
RE
AR
FR
ON
T
HO
T
RE
AR
FR
ON
T
Screw brackets to burner box with sheet metal screw.
(Two bracket assemblies included)
Screw sheet metal screws into brackets
and tighten firmly against bottom of countertop.
Note:
Be careful not to crack or damage
counter by overtightening.
Electrical Requirements
12
Electrical Requirements
Check your local codes regarding this unit.
This cooktop is supplied with a 3-wire,
240/208 volt, 60 HZ electrical system. A
white (neutral) is not needed for this unit. See
next section for grounding instructions. It
should be fused separately.
Refer to the specifications chart for kilowatt
rating and recommended amperage. House
wiring and fusing must comply with local
codes. If no local codes are applicable, wire
in accordance with the National Electrical
Code, ANSI/NFPA 70-latest edition.
Electrical Connection
When making the wire connections, use the
entire length of the conduit provided (3 feet).
The conduit must not be cut. Connect the
red and black leads from the unit conduit to
the corresponding leads in the junction box.
The bare ground wire in the conduit is con-
nected to the unit frame. When connecting
to a 3-conductor branch circuit, if local codes
permit, connect the bare ground connector
lead of the unit to the branch circuit neutral
(gray or white in color).
WARNING
ELECTRICAL
GROUNDING
INSTRUCTIONS
This cooktop must be electrically
grounded in accordance with local codes
or, in the absence of codes, with the Na-
tional Electrical Code, ANSI/NFPA 70-lat-
est edition.
FOR PERSONAL SAFETY,
THIS APPLIANCE MUST BE PROP-
ERLY GROUNDED.
CAUTION
Be sure the electric power is
off from the breaker box to the
junction box until the cooktop
is installed and ready to oper-
ate. The junction box should be con-
nected to a suitable ground.
WARNING
The electrical power to the
unit must be shut off while line
connections are being made.
Failure to do so could result
in serious injury or death.
WARNING
FIRE AND ELECTRICAL
SHOCK HAZARD
DO NOT
use an extension cord
with this appliance. Such use
may result in fire, electrical
shock, or other personal injury.
