The
ATA-100
is an analog telephone adapter
that connects an analog telephone device to
an IP network, enabling SIP-supported VoIP
communication in applications where con-
necting to an existing FXS port is not possible
or practical. In addition, the
ATA-100
has an
RJ-11 port for switching to the PSTN analog
phone network via touch tone commands.
Device programming is handled by a built-in
web browser. IP address assignment can be accomplished either by DHCP or by man-
ually assigning a static IP address. The
ATA-100
can be used with or without SIP regis-
tration. If unregistered, the
ATA-100
can perform basic tasks like sending voice data to
an IP-PBX or to another device on a LAN. SIP registration opens up an impressive list
of calling features and also enables internet telephone calling.
For Technical Support: Please contact
Cortelco at (800) 288-3132 Ext. 298
Provide an IP Network Connection for
Analog Telephone Devices
• Supports SIP 2.0(RFC 3261), TCP/UDP/IP,
RTP/RTCP, HTTP, ICMP, ARP, DNS, DHCP,
NTP, PPPoE, STUN, TFTP, etc.
• Powerful digital signal processing (DSP) to
ensure superb audio quality.
• Supports various codecs including G.711 (a-law
and u-law), G.723.1 (5.3K/6.3K), and
G.729A/B
• Supports out-of-band DTMF via RTP
(RFC2833) or SIP INFO.
• Supports Caller ID/Name display.
• Supports Call Hold, Call Waiting/Flash, Call
Transfer, and Call Forward.
• Supports automated NAT traversal without
manual manipulation of firewall/NAT
• Supports QoS
• Supports device configuration via built-in IVR
or Web browser
• Supports firmware upgrade via FTP
P
P
r
r
a
a
c
c
t
t
i
i
c
c
e
e
T
T
E
E
L
L
E
E
C
C
O
O
M
M
S
S
O
O
L
L
U
U
T
T
I
I
O
O
N
N
S
S
F
F
O
O
R
R
T
T
H
H
E
E
2
2
1
1
S
S
T
T
C
C
E
E
N
N
T
T
U
U
R
R
Y
Y
TECHNICAL
TECHNICAL
F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
• Link between an analog phone or doorbox and
an IP-PBX
• Voice communication on analog phones
between two networked locations (requires
two
ATA-100
’s)
• VoIP internet calling
• Internet enabled kiosks
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
ATA-100
ATA-100
Analog Telephone
Adapter
March 10, 2008
Power:
100-240V AC, 50-60 Hz 0.3A, power cord supplied
WAN Interface:
1xRJ45 100Base-T
LAN Interface:
1xRJ45 100Base-T
FXS Telephone Port:
1xRJ11
PSTN Port:
1xRJ11
LED:
VoIP/PSTN, POWER (The POWER LED is green. The
VoIP/PSTN LED is bicolor yellow/green.)
Dimensions:
118mm (W) x 74mm (D) x 28mm (H)
Shipping Weight:
0.45 kg (1 lb)
Temperature:
0°C to 40°C
Humidity:
10% to 95% (noncondensing)
