3/8”
3/8”
male
male
flare
flare
dapter
dapter
3/8”
male
flare
adapter
Installer supplied
flexible gas line
with 3/8” female
adapter or Viking
GHS12
Installer supplied
shut-off valve must
be easily accessible
3/8” female
flare adapter
Regulator
Assembly
3/8” male
flare adapter
LP/Propane Fixed Piping Connection
Check with your local gas utility company or with
local codes for instructions on installing gas
supply lines. Be sure to check on type and size of
run and how deep to bury the lines. If the gas line
is too small, the grill will not function properly.
To connect the supplied regulator assembly to
the incoming flexible gas line, attach with a 3/8”
female flare adapter to the 3/8” male flare
adapter to the regulator assembly. Ensure that
the regulator arrow points in the direction of the
gas flow towards the unit and away from the
supply. Attach the regulator assembly to the grill
unit with the 3/8” female flare adapter on the
regulator assembly to the 3/8” male flare adapter
on the grill.
Do not forget to place the
installer supplied gas valve in an
accessible location
25
Male
Male
coupler
coupler
Male
coupler
Installer supplied
flexible gas line
with 1/2” female
adapter or Viking
GHS12
Installer supplied
shut-off valve must
be easily accessible
female
coupler
7/8” male
flare adapter
Regulator
Assembly
Natural Fixed Piping Connection
Check with your local gas utility company or with
local codes for instructions on installing gas
supply lines. Be sure to check on type and size of
run and how deep to bury the lines. If the gas line
is too small, the grill will not function properly.
To connect the supplied regulator assembly to
the incoming flexible gas line, attach with a 7/8”
(2.2 cm) female flare adapter to the 7/8” (2.2 cm)
male flare adapter on the regulator assembly.
Ensure that the regulator arrow points in the
direction of the gas flow towards the unit and
away from the supply. Attach the regulator
assembly to the grill unit by pulling back the
female coupler sleeve towards the regulator.
Insert the coupler into the male coupler fitting on
the grill until the sleeve snaps forward securing
the connection.
Do not forget to place the
installer supplied gas valve in an
accessible location.
Note:
If using a Viking GSH12 flexible hose,
remove the 1/2” flare adapter and attach
hose to the 7/8” (2.2 cm) male flare on the
regulator assembly.
24
Connection
Operating Pressure
Supply Pressure
Standard Residential 1/2" ID gas
service line - 1/2" NPT male with
7/8" (2.2 cm) flare adapter.
4.0" W.C.P. Nat.
6" to 10" W.C.P. Nat. If in excess
of 10" W.C.P., a step-down
regulator is required.
Connection
Operating Pressure
Supply Pressure
Standard Residential 1/2" ID gas
service line - 1/2” NPT male with
3/8" flare adapter.
10.0" W.C.P. LP/Propane
11" to 14" W.C.P. LP. If in excess
of 14" W.C.P., a step-down
regulator is required.
