7
Lighting Burners
All burners are ignited by electric ignition. There are no open-flame, “standing” pilots.
Surface Burners-Automatic Reignition
To light the surface burners, push and turn the appropriate control knob counterclockwise to any
position. This control is both a gas valve and an electric switch. Burners will ignite at any “ON” position
with the automatic re-ignition system. If the flame goes out for any reason, the burners will automatically
reignite if the gas is still flowing. When gas is permitted to flow to the burners, the electric igniters start
sparking. On all surface igniters you should hear a “clicking” sound. If you do not, turn off the control
and check that the unit is plugged in and that the fuse or circuit breaker is not blown or tripped.
Rear, Center, and Front Burners
Push in and turn the control knob counter-clockwise to the desired setting. The control knobs can be turned to any desired setting
as the knobs do not have fixed positions between “Hi” and “Simmer”.
Within a few moments, enough gas will have traveled to the burner to light. When the burner lights, turn the burner control to any
position to adjust the flame size. Setting the proper flame height for the desired cooking process and selecting the correct cooking
vessel will result in superior cooking performance, while also saving time and energy.
Note:
The igniters may click a number of times before the burner ignites. This is normal. All igniters will spark regardless of which
burner is being operated.
Surface Operation
Operation
Surface Cooking Tips
• The simmer line on the control panel is the beginning of the variable simmer setting and produces a high simmer setting. Turn
the knob slowly towards “OFF” and the flame will adjust to a lower simmer setting.
• Use low or medium flame heights when cooking in cookware that are poor conductors of heat, such as glass, and ceramic.
Reduce the flame height until it covers approximately 1/3 of the cookware diameter. This will ensure more even heating within
the cookware and reduce the likelihood of burning or scorching the food.
• Reduce the flame if it is extended beyond the bottom of the cookware. A flame that extends along the sides of the cookware is
potentially dangerous,
could create hot surfaces resulting in burns,
heats the cookware handle and kitchen instead of the food,
and wastes energy.
• Reduce the flame height to the minimum level necessary to perform the desired cooking process. Remember that food cooks
just as quickly at a gentle boil as it does at a rolling boil. Maintaining a higher boil than is necessary causes a loss in food flavor
and nutrients.
Surface Heat Settings*
*Note:
The above information is given as a guide only. You may need to vary the heat settings to suit your personal requirements.
Heat Setting
Use
Simmer
Melting small quantities
Steaming rice
Simmering sauces
Low
Melting large quantities
Med Low
Low-temperature frying (eggs, etc.)
Simmering large quantities
Heating milk, cream sauces, gravies,
and puddings
Med
Sautéing and browning, braising, and pan-frying
Maintaining slow boil on large quantities
Med High
High-temperature frying
Pan broiling
Maintaining fast boil on large quantities
High
Boiling water quickly
Deep-fat frying in large cookware
