Printed in the U.S.A.
DOD 471
ZF304250 Rev A
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking
Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information.
Revisions of this document or new editions of it may be issued to incorporate such changes.
Warranty
Product Support: 715-386-8666
Speaker Recommendations
* Note:
An
FBI-1A
Feedback Eliminator is recommended. For more information, see DOD 465.
Ambient Noise Environment
Level
Typical Examples
Ceiling
Height
Distance Between
Speakers
Quiet -
Conversations very
easily understood.
50dB
Hotel lobby, hospital area,
quiet office
9 ft
14 ft
35 ft
50 ft
Normal -
Conversations
easily understood.
60dB
Bank lobby, department
store, auditorium
9 ft
14 ft
25 ft
35 ft
Noisy -
Voice must be
raised to be understood.
70dB*
Assembly line, supermarket,
restaurant
9 ft
14 ft
15 ft
25 ft
Very Noisy -
Conversation
difficult or impossible.
80dB*
Punch press, printing plant,
garage, yard
Paging
Horns
25 ft to
75 ft
IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, CONTACT VIKING TECHNICAL SUPPORT AT: 715-386-8666
Our Technical Support Department is available for assistance Monday to Friday 8:00am - 5:00pm central time. So we can give you better service, before you call please:
1.
Know the model number, the serial number, and what software version you have (see serial label).
2.
Have the Product Manual in front of you.
3.
It is best if you are on site.
TWO YEAR LIMITED WARRANTY
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of
purchase from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to
Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a
Return Authorization (RA) number.
This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage
caused by use of the product by the purchaser or others. This warranty does not cover non-EWP products that have been exposed to wet or corrosive environments.
This warranty does not cover stainless steel surfaces that have not been properly maintained.
NO OTHER WARRANTIES. VIKING MAKES NO WARRANTIES RELATING TO ITS PRODUCTS OTHER THAN AS DESCRIBED ABOVE AND DISCLAIMS
ANY EXPRESS OR IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
EXCLUSION OF CONSEQUENTIAL DAMAGES. VIKING SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO PURCHASER, OR ANY OTHER
PARTY, FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES ARISING OUT OF OR RELATED TO THE SALE OR USE OF THE
PRODUCT SOLD HEREUNDER.
EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY. WHETHER IN AN ACTION BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT
LIABILITY) OR ANY OTHER LEGAL THEORY, ANY LIABILITY OF VIKING SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, OR AT
VIKING'S OPTION, REFUND OF THE PURCHASE PRICE AS THE EXCLUSIVE REMEDY AND ANY LIABILITY OF VIKING SHALL BE SO LIMITED.
IT IS EXPRESSLY UNDERSTOOD AND AGREED THAT EACH AND EVERY PROVISION OF THIS AGREEMENT WHICH PROVIDES FOR DISCLAIMER OF
WARRANTIES, EXCLUSION OF CONSEQUENTIAL DAMAGES, AND EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY, ARE SEVERABLE FROM ANY
OTHER PROVISION AND EACH PROVISION IS A SEPARABLE AND INDEPENDENT ELEMENT OF RISK ALLOCATION AND IS INTENDED TO BE ENFORCED
AS SUCH.
RETURNING PRODUCT FOR REPAIR
The following procedure is for equipment that needs repair:
1.
Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain
a Return Authorization (RA) number. The customer MUST have a complete description of
the problem, with all pertinent information regarding the defect, such as options set, con-
ditions, symptoms, methods to duplicate problem, frequency of failure, etc.
2.
Packing: Return equipment in original box or in proper packing so that damage will not
occur while in transit. The original product boxes are not designed for shipping - an over-
pack box is required to prevent damage in transit. Static sensitive equipment such as a
circuit board should be in an anti-static bag, sandwiched between foam and individually
boxed. All equipment should be wrapped to avoid packing material lodging in or sticking
to the equipment. Include ALL parts of the equipment. C.O.D. or freight collect shipments
cannot be accepted. Ship cartons prepaid to:
VIKING ELECTRONICS
1531 INDUSTRIAL STREET
HUDSON, WI 54016
3.
Return shipping address: Be sure to include your return shipping address inside the box.
We cannot ship to a PO Box.
4.
RA number on carton: In large printing, write the RA number on the outside of each carton
being returned
.
RETURNING PRODUCT FOR EXCHANGE
The following procedure is for equipment that has failed out-of-box
(within 10 days of purchase):
1.
Customer must contact Viking’s Technical Support at 715-386-8666 to determine pos-
sible causes for the problem. The customer MUST be able to step through recom-
mended tests for diagnosis.
2.
If the Technical Support Product Specialist determines that the equipment is defective
based on the customer's input and troubleshooting, a Return Authorization (RA) num-
ber will be issued. This number is valid for fourteen (14) calendar days from the date
of issue.
3.
After obtaining the RA number, return the approved equipment to your distributor.
Please reference the RA number on the paperwork being shipped back with the
unit(s), and also the outside of the shipping box. The original product boxes are not
designed for shipping - an overpack box is required to prevent damage in transit.
Once your distributor receives the package, they will replace the product over the
counter at no charge. The distributor will then return the product to Viking using the
same RA number.
4. The distributor will NOT exchange this product without first obtaining the RA
number from you. If you haven't followed the steps listed in 1, 2 and 3, be aware
that you will have to pay a restocking charge.
4
