3
Side trim can be installed after attaching the grille assembly without the side spacers.
Installation - GKRVRFSS and STKVRFSS (Top Grille and Side Trim)
2
71-7/8”
(182.6 cm)
3
2
2
1
4
2
2
1
complete
Raise the unit up until the measurement from the
fl oor to the top of the grille assembly is 71-7/8
inches.
Shim trim has adhesive backing on both sides. Remove adhesive
backing on refrigerator side only. Fit the shim trim to the front of
the unit fi rst. With center hinge, the shim trim will have a cutout.
Use the cutout to locate the height of the shim trim.
Remove adhesive backing for the side trim. Locate
the top of the side trim with the top of the grille
assembly. Press the side trim into the refrigerator
cabinet at the center location.
Specifi cations
Freestanding Refrigerators
Description
RVRF336*
Overall height with grille
71-7/8” (182.6 cm)
Cutout height with grille
72” (182.9 cm)
Before installing the side
trim, install the grille
assembly without the side
spacers. Use alcohol swabs
to clean areas of refrigerator
cabinet and inside of side
trim to ensure adhesive
backing adheres to cabinet
and side trim.
1
step
