12
Using Your Induction Warmer
Setting the Timer
The Incogneeto units are equipped with a timer alarm that can be set to alert the operator when a
pan has been on the unit for a period of time up to 240 minutes (4 hours).
To enable/disable the timer:
●
Starting with the unit off, hold the Down Arrow while pressing the Power Button.
●
Release the buttons when the display comes on. Use the Up and Down Arrows to toggle
through the options until “t En” is shown on the display. Press the Lock Button once to select
the enable option.
●
Press the Up and Down arrows to toggle between the two setting options “on” and “off.” When
the desired option is displayed, press the Lock Button once to enter this option. The display will
flash three times to indicate the option has been saved.
●
Press the Power Button to exit this mode.
To set the timer interval:
●
Starting with the unit off, hold the Down Arrow while pressing the Power Button.
●
Release the buttons when the display comes on. Use the Up and Down Arrows to toggle
through the options until “t Int” is shown on the display. Press the Lock Button to select the
interval option.
●
Press the Up and Down Arrows to increase or decrease the amount of time desired for the timer
interval. When the desired time (displayed in minutes) is shown, press the Lock Button to enter
this option. The display will flash three times to indicate the option has been saved.
●
Press the Power Button to exit this mode.
Cooking Tips
The Magneeto
TM
II wireless communicator tab must no tbe covered by
the dish. This will prevent proper communications.
If a large pan must be used, then it is okay to cover the red LED, but
NOT the wireless communicator tab.
The pan must be in contact with the Temperature Sensor. Overheating
the pan can result, which may cause terminal damage to the
Magneeto
TM
II.
If a small pan must be used,then it must be in contact with the
Temperature Sensor.
