Viking Range FDWU324, Installation Manual

Page: 4 / 78

2
USA
designed for an electrical supply of 120 V
(volts), 60 Hz (hertz), AC, connected to a
dishwasher-dedicated, properly grounded
electrical circuit with a fuse or breakers
rated for 15 amperes. Electrical supply
conductors shall be a minimum of # 16
AWG copper wire rated at 75 °C (167
°F) or higher. These requirements mu
st
be met to prevent injury and machine
damage. Consult a quali
fi ed electrician if
in doubt.
• Do not use any extension cord or
portable outlet device to connect the
dishwasher to a power supply.
• Ensure that any pla st ic wrappings, bags,
small pieces etc. are disposed of safely
and kept out of the reach of children.
Danger of su
ff ocation!
• Remove the door to the washing
compartment when removing an old
dishwasher from service or discarding it.
Ensure that the appliance presents no
danger to children while being
st ored for
disposal.
• Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
NOTICE :
• The dishwasher drain hose mu st be
in st alled with a drain loop at lea st 28”
(710mm) o ff the cabinet fl oor; otherwise
the dishwasher may not drain properly.
• This dishwasher is intended for
residential use only, and should not be
used in commercial e
st ablishments.
• New in st allation - If the dishwasher is a
new in st allation, mo st of the work mu st
be done before the dishwasher is moved
into place.
• Replacement - If the dishwasher is
replacing another dishwasher, check
the exi
st ing dishwasher connections for
compatibility with the new dishwasher,
and replace parts as necessary.
1.1 INSPECT THE DISHWASHER
After unpacking the dishwasher and prior
to in
st allation, thoroughly inspect the
dishwasher for possible freight or cosmetic
damage. Report any damage immediately.
NOTICE :
• Cosmetic defects mu st be reported within
10 days of in st allation.
• Do not discard any bags or items that
come with the original package until
after the entire in
st allation has been
completed.